Laserfiche WebLink
Perform visual confirmation of <br /> overhead encumbrances,power <br /> lines,guy wires,communication <br /> wire etc. <br /> Excavating close to structures Undermining,cave in,collapse of Verify soil conditions,shore <br /> sidewalks,roadways etc. adjacent structures,roadways,or excavation accordingly to maintain <br /> sidewalks integrity of excavation.Watch for <br /> water saturation <br /> Excavation protection Falling into open excavation Delineate excavations clearly and <br /> barricade to protect employees <br /> and the public <br /> Engulfment of personnel due to Shore all excavations where <br /> trench wall collapse engulfment is possible,mandatory <br /> at depth of 5'or more.Per <br /> Cal/OSHA 1541.1(B)Excavations <br /> are less than 5 feet in depth and <br /> examination of the ground by a <br /> competent person provides no <br /> indication of a potential cave-in. <br /> Tabulated Data for device to be <br /> accessible at immediate site <br /> Unattended excavations in off work Possibility of trespass and or injury to Secure all excavations with <br /> hours public due to site condition adequate barriers to prevent <br /> exposures.Cover open holes with <br /> steel plating <br /> Driving into barricaded areas In the Delineate barricades with strobes <br /> dark or lighting to identify excavations <br /> Possibility of theft or intentional Put up signage citing the dangers of <br /> trespass trespassing,ensure a clear"do not <br /> cross line is installed." <br /> Assemble trench boxes/shoring Pinch points Keep personnel clear of all pinch <br /> points <br /> Assemble boxes/shoring per <br /> manufacturer recommendations <br /> Installing/Removing road plates Crushing Do not get any part of person <br /> under road plate <br /> Pinch point Use tag lines/positioning device or <br /> magnates to locate or position <br /> plates,do not use hands <br /> Shifting/Movement Secure plates as required by local <br /> authority. <br /> Install AC bevel of at least 12"in <br /> length around plate <br /> Slips Trips Falls Plates to be Non Skid surface <br /> Pipe handling Crushed/Struck By/Rolled over Never get under suspended load <br /> Pipe must be securely chalked to <br /> prevent roll out <br /> Page <br /> 11 <br />