Laserfiche WebLink
Product Models Product Features <br />Shallow Dispenser Pan <br />This shallow polyethylene <br />dispenser pan requires a <br />contained riser supply pipe to <br />enter through the bottom of the <br />pan only. This containment pan <br />is intended for use with rigid <br />piping systems. <br />Deep Dispenser Pan <br />This deep polyethylene <br />dispenser pan requires a <br />contained riser supply pipe <br />to enter through the bottom <br />of the pan only. This pan <br />is intended for use with <br />GeoFlex-D piping utilizing coax <br />fittings and jacketed riser <br />supply pipes. <br />Shallow Dispenser Sump <br />This shallow polyethylene <br />dispenser sump requires the <br />supply piping to enter the side <br />wall of the containment sump <br />at high elevations. These <br />sumps are ideal for suction <br />piping systems requiring direct <br />slope back to the tank. <br />Deep Dispenser Sumps <br />This deep polyethylene <br />dispenser sump allows the <br />supply piping to enter and/or <br />exit out of the side wall of the <br />containment sump at very low <br />elevations. These sumps are <br />ideal for pressure piping <br />systems requiring indirect <br />slope back to the tank. <br />Fiberglass <br />Dispenser Sump <br />This two-piece, easy access <br />fiberglass dispenser sump has <br />separate riser and base <br />sections. It permits the supply <br />piping to enter and/or exit out <br />of the side wall of the <br />containment sump at very low <br />elevations. These sumps are <br />ideal for pressure piping <br />systems requiring indirect slope <br />back to the tank. <br />Rain Lip <br />Virtually all under dispenser <br />containers have a 1" high rim which <br />extends above the surface of the <br />concrete island to prevent surface <br />water from entering the container. <br />Mounting Frame j <br />All under dispenser containers <br />include a heavy gauge galvanized <br />steel frame. Anchor bolts are <br />installed through integral mounting <br />holes which secure the above <br />ground product dispenser. <br />Concrete Anchors <br />Frame anchors are installed to secure <br />the sidewall of the container to the <br />concrete island. Anchor Bolts are <br />included to secure the dispenser and <br />container to the concrete island. in <br />Adjustable Stabilizer Bar <br />A variety of fully adjustable stabilizer <br />bars are available for accurate <br />positioning of shear valves and easy <br />connections of pipe fittings. <br />Flexible Entry Boots <br />Flexible Entry Boots are installed in <br />the wall of the container by means of <br />stud fasteners and compression <br />rings to provide liquid tight pipe and <br />conduit entries. <br />Sidewall Support <br />All Deep Dispenser Sumps include a <br />sufficient number of expandable and <br />removable Sidewall Supports. These <br />supports prevent the sidewalls from <br />deflecting due to extreme ground <br />pressures. <br />Fire Extinguisher <br />An optional automatic fire <br />extinguisher, called the Snuffer-, is <br />available to extinguish a fire inside an <br />under dispenser container due to <br />dispenser knock -over. <br />-71 <br />Pub No: EPFAOSO 620 Pennsylvania Drive • Exton, PA 19341 • Tel: (610) 321-0200 • Customer Service (800) 833-1883 envir (l �n <br />NoV.1997/'ZMCG 7' <br />Fax: (610) 321-0406 • http://www.envproduct.com • U.S. Patent 5263794, 5271518, 5297896, 5366318, � <br />5346625, 5398976, Other U.S. and Worldwide Patents Pending • 0 Copyright 1997 <br />