Laserfiche WebLink
n UJh�' l V v min 11JJku1A4Auv1u �•wuu�...0...... ....... - v. <br />Model 4885 Thread On P/V Vent <br />,apply fuel resistant pipe sealant to the threads on the 2" vent stack. Screw the P/V Vent onto <br />the vent stack and tighten to a ranee of 20 to 50 ft -lbs with a suitable wrench. DO NOT <br />OVER -TIGHTEN. Periodic maintenance is recommended (see below). <br />MAINTENANCE <br />Annually inspect the PN` Vent valve for foreign objects without removing the PN Vent <br />valve from the vent pipe by using the following procedure: <br />1. Remove the screws that holds the top cover on. <br />?. Remove anv debris that might be sittin_ inside the lower cover. <br />3. Check the drain holes in the lower cover for blockage. <br />4. The two (2) screens should not be removed. <br />5. Reinstall the top cover and retaining screws. <br />6. Tighten the screws firmly. <br />``OTE: DO NOT ALTER OR COVER THE P/V VENT <br />http://www.husky.com/9041.htm 1/29/2003 <br />