Laserfiche WebLink
Anzei icai7 Envii onn7ei7tal Network <br /> PAGE 7 <br /> r <br /> AEN (CALIFORNIA) <br /> QUALITY CONTROL REPORT <br /> AEN JOB NUMBER 951.1245 <br /> CLIENT PROJECT ID REGAL 603 <br /> ualit Control and Project Summar <br /> All laboratory quality control parameters were found to be within established <br /> limits <br /> Definitions <br /> Laboratory Control Sample (ECS)/Method Spike(s) Control samples of known composition LCS and Method Spike <br /> data are used to validate batch analytical results <br /> Matrix Spikes) Aliquot of a sample (aqueous or solid) with added quantities of specific compounds and <br /> subjected to the entire analytical procedure Matrix spike and matrix spike duplicate QC data are advisory. <br /> Method Blank An analytical control consisting of all reagents, internal standards, and surrogate standards <br /> carried through the entire analytical process Used to monitor laboratory background and reagent contamination <br /> Not Detected (ND). Not detected at or above the reporting limit. <br /> Relative Percent Difference (RPD) An indication of method precision based on duplicate analysis. <br /> Reporting Limit (RL). The lowest concentration routinely determined during laboratory operations The RL is <br /> generally 1 to 10 times the Method Detection Limit (MDL) Reporting limits are matrix, method, and analyte <br /> dependent and take into account any dilutions performed as part of the analysis <br /> Surrogates; organic compounds which are similar to analytes of interest in chemical behavior, but are not found <br /> in environmental samples. surrogates are added to all blanks, calibration and check standards, samples, and <br /> spiked samples. Surrogate recovery is monitored as an indication of acceptable sample preparation and <br /> instrumental performance <br /> D- Surrogates diluted out. <br /> # Indicates result outside of established laboratory QC limits. <br />