Laserfiche WebLink
Certification: <br />Leak Threshold <br />Applicability: <br />California Edition: September 1997 <br />Veeder-Root <br />TLS-3501350PC / 350R / 350RPC Line Leak Detector, Series 8484 <br />AUTOMATIC ELECTRONIC LINE LEAK DETECTOR <br />Leak rate of 0.1 gph with Po=100.0% and PFA=O%. <br />0.05 gph. A leak is declared if the output of the measurement system equals or <br />exceeds this threshold. <br />Gasoline, diesel, aviation fuel, and solvents. <br />Specification: System tests pressurized fiberglass and steel pipelines. <br />Tests are conducted at operating pressure. <br />System will not function with a mechanical line leak detector installed <br />in the pipeline. <br />Pipeline Capacity: Maximum of 98.4 gallons. <br />Waiting Time: None between delivery and testing. <br />Minimum of 2 hours, 30 minutes between dispensing and testing. <br />Test Period: Response time is 18 minutes. <br />Test data are acquired and recorded by a microprocessor. <br />Calculations are automatically performed by the microprocessor. <br />System Features: Permanent installation on pipeline. <br />Automatic testing of pipeline. <br />Preset threshold. <br />Single test to determine if pipeline is leaking. <br />Dispenser shutdown, message display and alarm activation if leak is declared. <br />Calibration: System must be checked annually and calibrated if necessary in accordance with <br />manufacturer's instructions. <br />Veeder-Root Evaluator: Midwest Research Institute <br />125 Powder Forest Dr. Tel: (816) 753-7600 <br />Simsbury, CT 06070-2003 <br />Tel: (203) 651-2700 Date of Evaluation: 08/07/91 <br />280 <br />Appearance on this list is not to be construed as an endorsement by any regulatory agency nor is it any guarantee of the performance of <br />the method or equipment. Equipment should be installed and operated in accordance with all applicable laws and regulations. <br />