|
2021 ANNUAL GROUNDWATER MONITORING REPORT
<br /> TEICHERT AGGREGATES AND GRANITE CONSTRUCTION
<br /> VERNALIS AREA
<br /> replaced the Brown's#1 well for water quality monitoring purposes, as the Brown's#1 well was
<br /> vandalized in 2005. In 2019, Granite#3 was no longer in operation and was replaced with Granite#5 for
<br /> water quality monitoring purposes. From 1994 to 1997,the Koster irrigation well was sampled
<br /> periodically(depending on the availability of a tractor engine for the pump).
<br /> Samples from the water quality network wells are analyzed for electrical conductivity(EC),total
<br /> dissolved solids(TDS), pH,general minerals (calcium, magnesium,sodium, potassium, sulfate, chloride,
<br /> total alkalinity[including hydroxide,carbonate, and bicarbonate alkalinity],and total hardness), nitrate,
<br /> nitrite,fluoride, boron,and metals [copper, iron, manganese,and zinc]). Samples from the Hall and
<br /> Faulkner domestic wells are also analyzed for coliform bacteria (SM 9221B [15-tube] procedure with
<br /> fecal confirmation). Phosphorus sampling was discontinued in 1998.
<br /> Teichert's ongoing monitoring and reporting activities are inclusive of(and exceed) activities specified in
<br /> Granite's approved Groundwater Monitoring Plan (LSCE, 2009).Specifically, Granite's approved
<br /> Groundwater Monitoring Plan includes:
<br /> 1. Semi-annual groundwater level measurements in five shallow wells(Hall, Rustan,Thoming,
<br /> Koster,4S/6E-5A1), one composite well(Petz), and four deep wells(South Tracy#3, Granite
<br /> #4, Brown's#1, Brown's New). Faulkner is used in place of the destroyed Thoming well. Data
<br /> from South Tracy#1,South Tracy 9054,and Granite#3 are available to supplement data for
<br /> South Tracy#3 and Granite#4.
<br /> 2. Semi-annual groundwater quality retrieval from one shallow well (Hall) and three deep wells
<br /> (South Tracy#3, Granite#3,and Brown's New). Granite#5 is used in place of Granite#3.
<br /> Groundwater quality laboratory analyses shall consist of the same constituents listed above
<br /> for Teichert's compliance monitoring activities minus nitrite,fluoride,total hardness, and
<br /> bacteriological analyses.
<br /> 3 SAMPLING PROCEDURES
<br /> Prior to the wells' annual sampling,depth-to-water measurements are obtained in relation to the wells'
<br /> surveyed reference points, i.e.,the top of the well casings, by lowering an electrical sounder in the well
<br /> casing following the manufacturer's guidelines. Field staff double-checks readings and records
<br /> measurements to the nearest 0.01 foot.All elevations are given in reference to the National Geodetic
<br /> Vertical Datum of 1929, i.e.,the mean sea level datum(msl).After the depth to water is measured,field
<br /> parameters are collected from the supply wells prior to sample collection.The following instrumentation
<br /> is used by LSCE staff:
<br /> • Depth to water:Slope Indicator electrical sounder(Water Level Indicator)
<br /> • pH,temperature, electrical conductivity(EC), dissolved oxygen (DO),oxygen reduction
<br /> potential (ORP): YSI instrumentation (Model 556)
<br /> • turbidity:Oakton T-100 portable turbidity meter
<br /> LUHDORFF&SCALMANINI
<br /> CONSULTING ENGINEERS 3
<br />
|