SU0006915 - Laserfiche WebLink

Home Browse Search

e �.. SI PLAN CHECK-L.IST� ,e SITE:PLAN,CHECK4LlST • Size: The Site Plan mu st be drawn,on minimum 18"x 24"reproducible material. • North Arrow, Date and Scale;',Use.an-engineer's scale {i.e., 1"to 20'or 1"to 40', preferred). The direction of "north" should.be pointing towards the top:of the,page. • Streets and Easements location and names of all streets and easements bordering on the property with, access:details: • Property Lines- All property.lines,or boundarylines of the parcel with.dimensions. • Vicinity Map: A vicinity map:showing.the location of the property in relation to surrounding streets. • Variance Request: The requested Variance must be clearly identified and dimensioned. • Existing and Proposed.Development: All existing structures (labeled 'existing')and any proposed structures (labeled'proposed')with dimensions, square footage and distances from other structures and property lines. Any existing.structures plonned for removal should be shown with dashed lines. The use and number of floors should be labeled on.each structure. • Parking and Driveways: The location,dimensions and surface material of all existing and proposed parking and driveways. Calculations indicating the number of required spaces must be shown. (Refer to 'County Parking Lot Standards'). • Water Wells: The location of existing.and proposed water wells on-site and any off-site wells within 150'6f the proposed development. Wells must be meet the following setbacks: - 5'from structures; - 50'from septic tanks; - 100'from leach lines; - 150'from sumps or seepage pits; and - 10'from property lines. • Sewers and Septic Tanks: The location of the sewer outlet, public sewer hook-up, or existing and proposed sewage disposal systems and any off-site sewage disposal systems within 150'of the property. Septic tanks must meet the following setbacks: - 5'from property lines, structures, driveways and swimming pools; - 50'from water wells. Leach lines must meet the following setbacks: - 10'from structures, driveways and swimming pools; - 100'from wells, streams and waterways. - 5'to 75'from property lines depending on zoning or the location of septic systems on adjoining properties (this requirement also applies to seepage pits). • Storm Drainage: The location of existing and proposed storm drainage facilities (check with Engineering staff regarding design criteria). If subject to flooding, the 100-year flood elevations must be shown. Indicate any unusual topographic features of the site (e.g. steep slopes, or drainage courses). Grading and contours need to be shown. • Landscaping: The location of existing and proposed landscaping and trees 6" or greater in diameter(note any trees to be removed). Calculation indicating the percentage of the net site area to be landscaped must be shown. (Refer to County Landscaping Standards). • Signs, Fences, Storage and Trash Enclosures: The location of and height of all existing and proposed signs and fences and the location and dimensions of all open and/or enclosed storage and trash receptacles. SITE PLANS MUST BE COMPLETE AND LEGIBLE • Before applying, check your Site Plan to make sure that it contains all of the information cited above. You are encouraged to have one of our counter staff review your draft Site Plan prior to having copies run. • Faint prints and light blue lines will not be accepted because they cannot be reproduced or microfilmed. FMEVSMPlanning Application Fonns\Variance.doc.(Revised 8-IM4) Page 7 of 7