Laserfiche WebLink
I <br /> LABORATORY NARRATIVE <br /> -� <br /> TO-3 . <br /> Geological Technics <br /> Workorder# 0205001 <br /> Two 1 Liter Tedlar Bag samples were received on May 01, 2002. The laboratory performed analysis via <br /> modified EPA Method TO-3 for Methyl tert-Butyl Ether (MTBE), Benzene, Toluene, Ethylbenzene, Xylenes <br /> and Total Petroleum Hydrocarbons(TPH). MTBE and BTEX were analyzed via GC/PID and TPH via GC/FID. <br /> The TPH results are calculated using the response of Gasoline. A molecular weight of 100 is used to convert the <br /> TPH ppmv result to ug/L. The method involves concentrating up to 200 mL of sample. The concentrated aliquot <br /> is then dry purged to remove water vapor prior to entering the chromatographic system. See the data sheets for <br /> the reporting limits for each compound. <br /> i <br /> Receiving Notes <br /> There were no receiving discrepancies. <br /> Analytical Notes <br /> i <br /> There were no analytical discrepancies. <br /> Definition of Data Oualifyine Flags <br /> Seven qualifiers may have been used on the data analysis sheets and indicate as follows: <br /> B - Compound present in laboratory blank greater than reporting limit. <br /> J- Estimated value. <br /> E- Exceeds instrument calibration range. <br /> S - Saturated peak. <br /> Q- Exceeds quality control limits. <br /> U Compound analyzed for but not detected above the detection limit. <br /> i M- Reported value may be biased due to apparent matrix interferences. <br /> File extensions may have been used on the data analysis sheets and indicates <br /> as follows: <br /> a-File was requantified <br /> b-File was quantified by a second column and detector <br /> rl-File was requantified for the purpose of reissue <br />{ <br /> Page, 2 of 8 <br />