Laserfiche WebLink
Ms. Hayes July 27, 2005 <br /> PA-0500396 Page 2 <br /> requirements and after construction emit or may emit one or more affected pollutant. The applicant <br /> must contact the District's Small Business Assistance Office at (209) 557-6446 to receive additional <br /> information/instructions. <br /> Rule 4002 (National Emission Standards for Hazardous Air Pollutants). In the event that any portion <br /> of an existing building will be renovated, partially demolished or removed, the project will be subject to <br /> District Rule 4002. Prior to any demolition activity, an asbestos survey of existing structures on the <br /> project site may be required to identify the presence of any asbestos containing building material <br /> (ACBM). Any identified ACBM having the potential for disturbance must be removed by a certified <br /> asbestos-contractor in accordance with CAL-OSHA requirements. If you have any questions <br /> concerning asbestos related requirements, please contact Mr. Dwayne England of this office at (559) <br /> 230-5973, or contact CAL-OSHA at (559) 454-1295. An Asbestos Requirements Bulletin has been <br /> enclosed for the applicant. <br /> Rule 4102 (Nuisance) applies to any source operation that emits or may emit air contaminants or <br /> other materials. In the event that the project or construction of the project creates a public nuisance, <br /> it could be in violation and be subject to District enforcement action. <br /> Rule 4601 (Architectural Coatings) limits volatile organic compounds from architectural coatings. <br /> This rule specifies architectural coatings storage, clean up and labeling requirements. <br /> Rule 4641 (Cutback, Slow Cure, and Emulsified Asphalt, Paving and Maintenance Operations). If <br /> asphalt paving will be used, then paving operations of this project will be subject to Rule 4641. This <br /> rule applies to the manufacture and use of cutback asphalt, slow cure asphalt and emulsified asphalt <br /> for paving and maintenance operations. <br /> The District encourages innovation in measures to reduce air quality impacts. There are a number of <br /> features that could be incorporated into the design/operation of this project to provide additional <br /> reductions of the overall level of emissions. (Note: Some of the measures may already exist as County <br /> development standards. Any measure selected should be implemented to the fullest extent possible.) <br /> The suggestions listed below should not be considered all-inclusive and remain options that the agency <br /> with the land-use authority should consider: <br /> • Trees should be carefully selected and located to protect the building(s) from energy consuming <br /> environmental conditions, and to shade paved areas. Trees should be selected to shade paved <br /> areas that will shade 50% of the area within 15 years. Structural soil should be used under paved <br /> areas to improve tree growth. A brochure has been included for the applicant. <br /> For Structural Soil see ham://www.hort.cornell.edu/uhi/outreach/csc/ <br /> For Tree Selection see httl)://www.ufei.org/ <br /> For Urban Forestry see http://www.coolcommunities.org htti)://wcufre.ucdavis.edu <br /> http://www.lgc.org/bookstore/energy/downloads/siv treeguidelines.pdf <br /> • The District encourages the applicant and fleet operators using the facility to take advantage of the <br /> District's Heavy-Duty Engine program to reduce project emissions. The Heavy Duty program <br /> provides incentives for the replacement of older diesel engines with new, cleaner, fuel-efficient diesel <br /> engines. The program also provides incentives for the re-power of older, heavy-duty trucks with <br /> cleaner diesel engines or alternative fuel engines. New alternative fuel heavy-duty trucks also qualify. <br /> For more information regarding this program contact the District at (559)230-5858 or visit our website <br /> at http://www.valleyair.org/transportation/heavvdutyidx.htm. <br /> • As many energy conserving and emission reducing features as possible should be included in the <br /> project. Energy conservation measures include both energy conservation through design and <br /> operational energy conservation. Examples include (but are not limited to): <br /> - Increased energy efficiency (above California Title 24 Requirements) <br />