SU0005331 - Laserfiche WebLink

Home Browse Search

Rick Griffin _. _ September 14, 2006 PA-0500543(MS) Page 2 submitted as specified in Section 6.3.1 of Rule 8021. Construction activities shall not commence until the District has approved the Dust Control Plan. A template of the District's Dust Control Plan is available at http://www.vallevair.org/busind/comply/PM10/forms/DCP-Form.doc Rule 4002 (National Emission Standards for Hazardous Air Pollutants) In the event that any portion of an existing building will be renovated, partially demolished or removed, the project will be subject to District Rule 4002. Prior to any demolition activity, an asbestos survey of existing structures on the project site may be required to identify the presence of any asbestos containing building material (ACBM). In accordance with CAL-OSHA requirements, a certified asbestos contractor must remove any identified ACBM having the potential for disturbance. If you have any questions concerning asbestos related requirements, please contact Mr. Joe Avila of this office at(559)230-5951, Ms. Jan Sudomier at (209) 557- 6422, or contact CAL-OSHA at (559) 454-1295. The District's Asbestos Requirements Bulletin can be found online at http://vallevair.ora/busind/comply/asbestosbuitn.htm. Rule 4102 (Nuisance) This rule applies to any source operation that emits or may emit air contaminants or other materials. In the event that the project or construction of the project creates a public nuisance, it could be in violation and be subject to District enforcement action. Rule 4601 (Architectural Coatings) This rule limits volatile organic compounds from architectural coatings by specifying architectural coatings storage, clean up and labeling requirements and applies to any person who supplies, sells, offers for sale, applies, or solicits the application of any architectural coating. Rule 4641 (Cutback, Slow Cure, and Emulsified Asphalt, Paving and Maintenance Operations) If asphalt paving will be used, then paving operations of this project will be subject to Rule 4641. This rule applies to the manufacture and use of cutback asphalt, slow cure asphalt and emulsified asphalt for paving and maintenance operations. Rule 4901 (Wood Burning Fireplaces and Wood Burning Heaters) This rule limits PM10 and PM2.5 emissions from residential development. Construction plans for residential developments may be affected by section 5.3, specifically: - 5.3.1 — No person shall install a wood burning fireplace in a new residential development with a density greater than two (2)dwelling units per acre. - 5.3.2— No person shall install more than two (2) EPA Phase II Certified wood burning heaters per acre in any new residential development with a density equal to or greater than three (3) dwelling units per acre. - 5.3.3 — No person shall install more than one (1) wood burning fireplace or wood burning heater per dwelling unit in any new residential development with a density equal to or less than two (2) dwelling units per acre. More information about Rule 4901 can be found on our website at www.vallevair.ora. For compliance assistance, please contact Mr.Wayne Clarke, Air Quality Compliance Manager, at (559) 230-5968. Rule 9510 (Indirect Source Review) This rule was adopted to reduce the impacts of growth in emissions from all new development in the San Joaquin Valley. Rule 9510 requires applicants subject to the rule to provide information that enables the District to quantify construction, area and operational PM10 and NOx emissions, and potentially mitigate a portion of those emissions. An application must be filed with the District no later than concurrent with application with a local agency for the final discretionary approval. For more information and instruction, please contact the District's ISR staff by phone at (559) 230-5800 or by email at ISR&vallevair.org. The District encourages innovation in measures to reduce air quality impacts. There are a number of features that could be incorporated into the design/operation of this project to provide additional reductions of the overall level of emissions. Any measure selected should be implemented to the fullest extent