Laserfiche WebLink
Mr. Mahmoud Parvar <br /> Page 3 <br /> January 26,2000 <br /> FIELD EXPLORATION AND LABORATORY TESTING <br /> The field investigation conducted at this site consisted of drilling 4 exploratory test holes <br /> carried to a depth of 49 feet. The approximate location of the test holes was determined in <br /> conjunction with the owner,after taking into consideration the state mineral resource map. Test hole <br /> locations were determined in the field by approximating off of the parcel map provided by Triple <br /> E Engineering. For approximate location of the test holes see the Location Map, Plate No. 1. <br /> The test holes were drilled with a truck mounted Deep Rock drill rig,utilizing 4.5 inch diameter, <br /> continuous flight auger. Sampling of the test holes above the groundwater was performed at various <br /> depths by a California modified split spoon sampler. Blow counts (SPT) required to drive the <br /> sampler every 6 inches were recorded and this information is presented on the Log of Boring sheets, <br /> Plates No. 2 through 9. Addition grab samples were obtained from the auger flights as they were <br /> removed from the holes for depths blow the ground water. <br /> Samples obtained were taken to the laboratory of Neil O.Anderson&Associates,Inc.,Lodi, <br /> California and used for various lab tests. Tests performed included gradations,sand equivalents,and <br /> atterberg limits. A summary of the laboratory test results is presented in the following Table 2, <br /> Laboratory Test Results. <br /> TABLE 2, LABORATORY TEST RESULTS <br /> Gradation Sand Atteherg Limits <br /> Test Depth Material %passing sieve Equi- <br /> Hole (ft.) valent Liquid Plasticity <br /> #4 #8 1 #16 #30 1 450 #100 1 #200 Limit Index <br /> B-I 10 fine clean sand -- 100 98 74 26 6.9 3.7 - <br /> B-1 15 medium to fine clean sand 100 98 84 48 7.2 2.0 - <br /> B-2 10 silty fine sand 100 98 81 59 35 20 45 - <br /> B-2 20 medium to fine clean sand 100 97 84 45 10 3.9 - - <br /> B-2 30 medium to fine clean sand 100 98 84 47 17 6.7 65 <br /> B-3 10 very fine sand w/some silt -- -- 100 91 36 11 49 <br /> B-3 20 fine sandy silt& very fine -- -- -- 100 98 81 70 -- 28 5 <br /> clean sand <br /> B-3 40 medium to fine clean sand 100 98 85 50 19 8.4 3.9 -- -- -- <br /> B-3 50 medium to fine sand 100 99 94 67 21 10 7.2 77 - <br /> B-4 5 silt w/some sand 100 98 97 96 95 94 91 -- 31 2 <br /> B-i 15 1 medium to fine clean sand 100 99 91 63 12 1 3.1 <br /> rpER30 <br /> z � <br /> 0 <br /> �Jsoc. <br />