SU0012076 - Laserfiche WebLink

Home Browse Search

h. LANDSCAPING: Landscaping shall be provided and comply with the following: (1) This project will be required to comply with the Model Water Efficient Landscape Ordinance Requirement per California Code of Regulations, Title 23, Division 2, Chapter 2.7. (2) A minimum ten (10) foot wide landscaped strip, respecting the ultimate right-of-way width of E. Peltier Road, N. State Route 99 W. Frontage Road, and the State Route 99 southbound off-ramp shall be installed across the frontage of the project site. (Development Title Sections 9-1020.7 and 9-1020.9) (3) All areas not used for buildings, parking, driveways, walkways, approved outdoor storage areas, or other permanent facilities shall be landscaped. (Development Title Section 9-1020.8[a]) (4) Areas of the property which are not part of the project shall be barricaded from traffic and kept mowed and dust free. i. SCREENING: Screening shall be provided and comply with the following: (1) All storage materials and related activities, including storage areas for trash, shall be enclosed by a screen six (6) to seven (8) feet in height. Items stored within one hundred (100) feet of a dedicated street or residential zone shall not be stacked higher than two (2) feet above the adjacent screen. (Development Title Section 9-1022.4[e][2][A]) (2)All loose materials shall be contained in bins. (Development Title Section 9-505.6[d]) (3) Truck parts or inoperable trucks that are stored on the property of the truck terminal must be directly related to the operation of the truck terminal and shall be contained within a specified area that is fenced to provide an effective visual barrier. (Development Title Section 9-505.6[e]) (4) Any construction materials and all equipment used for the transfer and/or storage of construction materials shall be contained in a specified area that is fenced to provide an effective visual barrier. (Development Title Section 9-505.6[f]) j. SIGNS: Sign details shall be consistent with Chapter 9-1710 of the Development Title and be included on the Site Plan. All portions of any sign shall be set back a minimum of five (5)feet from any future right-of-way line, including any corner cut-off(snipe). (Development Title Section 9-1710.2[g]) k. BUILDING CODE REQUIREMENTS: The following California Building Code(CBC)and San Joaquin County Ordinance requirements will be applicable to the proposed project. The following conditions shall be addressed prior to submittal of a building permit application to the Building Inspection Division: (1) A building permit for each separate structure or building is required. Submit plans, Specifications and supporting calculations, prepared by a Registered Design Professional(architect or engineer) for each structure or building, showing compliance with The 2016 California Building, Existing Building, Mechanical, Plumbing, Electrical, Energy and Fire Codes as may be applicable. Plans for the different buildings or structures may be combined into a single set of construction documents. (2) A grading permit will be required for this project. Submit plans and grading calculations, including a statement of the estimated quantities of excavation and fill, prepared by a Registered Design Professional. The grading plan shall show the existing grade and finished grade in contour intervals of sufficient clarity to indicate the nature and extent of the work and show in detail that it complies with the requirements of the code. The plans shall show the existing grade on adjoining properties insufficient detail to identify how grade changes will conform to the requirements of the code. PA-1600194 (TE, UP) Conditions of Approval 3