SU0004310 - Laserfiche WebLink

Home Browse Search

CONDITIONS OF APPROVAL PA-02-279 Hudson Site Approval Application No. PA-02-279 was approved by the San Joaquin County Community Development Department on January 17, 2003. The effective date of approval is January 27, 2003. This approval will expire on July 28, 2004, which is 18 months from the effective date of approval, unless (1) all Conditions of Approval have been complied with, (2) all necessary building permits have been secured and remain in force, and (3) all necessary permits from other agencies have been secured and remain in force. Unless otherwise specified, all Conditions of Approval and Ordinance requirements shall be fulfilled prior to the establishment of the use and the issuance of any building permits. Those Conditions followed by a Section Number have been identified as Ordinance requirements pertinent to this application. Ordinance requirements cannot be modified, and other Ordinance requirements may apply. 1. COMMUNITY DEVELOPMENT DEPARTMENT (Staff Contact: Rick Griffin, [209]468-3154) a. BUILDING PERMIT: Submit an "APPLICATION-COMMERCIAL BUILDING PERMIT'. The Site Plan required as a part of the building permit must be prepared by a registered civil engineer or licensed architect. This Plan must show drainage, driveway access details including gates, on-site parking, landscaping, signs, existing and proposed utility services, and grading (refer to the "SITE PLAN CHECK LIST' for details). A fee is required for the Site Plan review. (Development Title Section 9-884) b. APPROVED USE: This approval is for a change of use from Wholesaling and Distribution to General Industrial-Intermediate to allow for the manufacture and storage of plastics products and the expansion of an existing 13,000 square foot warehouse for a total of 20,000 square feet. c. PARKING: Off-street parking shall be provided and comply with the following: (1) All parking spaces, driveways, and maneuvering areas shall be surfaced and permanently maintained with base material of appropriate depth with asphalt concrete or Portland cement concrete to provide a durable, dust free surface. Bumper guards shall be provided when necessary to protect adjacent structures or properties. (Development Title Section 9-1015.5[e]) (2) A minimum of forty-eight(48) parking spaces shall be provided, including two accessible spaces, one of which shall be van accessible. Accessible spaces shall be located as close as possible to the primary entrance (C.C.R., Title 24). (Two [2] spaces are required for every 1,000 feet of building area. One-half (.5) space is required for every employee.) (Development Title Section 9-1015.3) (3) One bicycle parking rack or storage device is required for every 20 parking spaces. (Development Title Section 9-1015.7) (4) Each parking stall shall be an unobstructed rectangle, minimum nine (9) feet wide and twenty (20)feet long. (Development Title Section 9-1015.5[b]) (5) Compact parking spaces shall be a minimum seven and one-half (71/2) feet wide and sixteen (16) feet long, be individually designated as a compact space, and make up no more than twenty-five (25) percent of the required spaces. (Development Title Section 9-1015.5[c]) Conditions of Approval - 1 - PA-02-279