SU0005291 - Laserfiche WebLink

Home Browse Search

TENTATIVE MAP CHECK LIST TL.4TATIVE MAP CHECK LIST Size: The tentative map must be drawn on 18"x 26"material. • North Arrow, Date and Scale: Use an engineer's scale (i.e., 1"to 20'or 1"to 40', preferred). The direction of"north"should be pointing towards the top of the page. • Streets and Easements: Location and names of all streets and easements bordering on the property with access details. • Property Lines:All existing and proposed property lines or boundary lines of the parcel with dimensions. Label each Parcel 1, 2, 3,4 or"remainder"and indicate the net acreage of each. A dark,solid line shall be used around the entire original parcel(s). All proposed parcels and any proposed remainder shall also be lined with a dark solid line. • Vicinity Map:A vicinity map showing the location of the property in relation to surrounding streets. • Names: Name,address and telephone number of owner;the name, address and telephone number of the subdivider, surveyor and engineer filing the map. • Adjacent Property Owners- Names of adjoining property owners, including those across any easements, roads, waterway,etc. • Contour Lines: Contour lines or spot elevation relative to mean sea level datum. • Dedications: Improvements and easements to be dedicated to the County. • Existing and Proposed Improvements:All existing structures labeled"existing"and any proposed structures labeled"proposed" with dimensions, square footage and distances from other structures and existing and proposed property lines. Any existing structures planned for removal should be shown with dashed lines. The use and number of floors should be labeled on each structure. • Parking and Driveways:The location, dimensions and surface material of all existing and proposed parking and driveways. • Water Wells: The location of existing and proposed water wells on-site and any off-site wells within 150'of the proposed development. Wells must be meet the following setbacks: 5'from structures; 50'from septic tanks; 100'from leach lines; 150'from sumps or seepage pits;and 10'from property lines. If public water will be utilized, a"will-serve" letter must be submitted from the service provider. • Sewers and Septic Tanks:The location of the sewer outlet, public sewer hook-up,or existing and proposed sewage disposal systems including leach field areas and any off-site sewage disposal systems within 150'of the property. Septic tanks must meet the following setbacks: 5'from property lines, structures, driveways and swimming pools; 50'from water wells. Leach lines must meet the following setbacks: 10'from structures, driveways and swimming pools; 1 00'from wells, streams and waterways. 5'to 75'from property lines depending on zoning or the location of septic systems on adjoining properties (this requirement also applies to seepage pits). If public sewage disposal will be utilized, a"will-serve" letter must be submitted from the service provider. • Storm Drainage:The location of existing and proposed storm drainage facilities(check with Engineering staff regarding design criteria). If subject to flooding,the 100-year flood elevations must be shown. Indicate any unusual topographic features of the site(e.g.steep slopes, or drainage courses). • Watercourses: The location of existing watercourses and the extent of any levee,with toe and crown indicated. • Flooding: The area subject to flood from an intermediate regional flood and depth of flood waters, if applicable. Proposed method of flood protection if property is subject to inundation from an intermediate regional flood or other flood hazard. TENTATIVE MAPS MUST BE COMPLETE AND LEGIBLE • Before applying,check your tentative map to make sure that it contains all of the information cited above. You are encouraged to have one of out counter staff review your Tentative Map prior to having copies run. • Faint prints and light blue lines cannot be accepted because they cannot be reproduced or microfilmed. F.\DEVSVS\Planning Application Forms\Minor Subdivision(Rev. 12-09-04) Page 9 of 9