Laserfiche WebLink
Table 5.1A-11 <br /> NCPA Lodi Energy Center <br /> Calculation of Noncriteria Pollutant Emissions from the Existing Unit: <br /> Gas Turbine <br /> Parameter <br /> Heat Input Rate (MMBtu/hr @ HHV) (1) 463.0 <br /> Annual Operating Hours 8,760 <br /> Emission Maximum <br /> Factor Annual Emissions <br /> Pollutant Ib/MMBtu 2 t <br /> Ammonia (3) 0.0335 67.94 <br /> Propylene 7.68E-04 1.56 <br /> HAPs <br /> Acetaldehyde 4.00E-05 0.08 <br /> Acrolein 6.40E-06 0.01 <br /> Benzene 1.20E-05 0.02 <br /> 1,3-Butadiene 4.30E-07 0.00 <br /> Ethylbenzene 3.20E-05 0.06 <br /> Formaldehyde 7.10E-04 1.44 <br /> Hexane 2.58E-04 0.52 <br /> Naphthalene 1.30E-06 0.00 <br /> PAHs 1.30E-07 0.00 <br /> Benz(a)anthracene 2.25E-08 inc <br /> Benzo(a)pyrene 1.38E-08 inc <br /> Benzo(b)fluoranthene 1.13E-08 inc <br /> Benzo(k)fluoranthene 1.10E-08 inc <br /> Chrysene 2.51 E-08 inc <br /> Dibenz(a,h)anthracene 2.34E-08 inc <br /> Indeno(1,2,3-cd)pyrene 2.34E-08 inc <br /> Propylene oxide 4.76E-05 0.10 <br /> Toluene 1.30E-04 0.26 <br /> Xylene 6.40E-05 0.13 <br /> TOTAL HAPS 2.64 <br /> Notes <br /> 1. Heat input rate (in MMBtu/hr) is limited by Permit Condtion 28. <br /> 2. All factors except individual PAHs, hexane and propylene from AP-42, Table 3.4-1. <br /> Individual PAHs, hexane and propylene are CATEF mean results as AP-42 <br /> does not include factors for these compounds. MMscf converted to MMBtu using <br /> typical fuel analysis. <br /> 3. Based on permitted ammonia slip limit of 25 ppmc. <br /> 4. Annual TAC emissions were calculated from the emission factor(in Ib/MMBtu), the heat input ra <br /> in MMBtu/hr), and annual operating hours. <br />