Laserfiche WebLink
ARB Approved IOM—Executive Orders VR-201-G and VR-202-G (Swivel Breakaway—807) ITEM#90 <br /> 7. Remove the shear pin (#787-1) located in the spare shear pin location of the breakaway and <br /> install in place of the original. <br /> 8. Torque the shear pin to 20 inch-pounds (-r 1.5 ft-lbs). DO NOT OVER-TIGHTEN. <br /> 9. If available, install a shear pin (#787-1) in the spare shear pin location. <br /> 10. Remove the Breakaway Reconnection Clamp. <br /> 11. Proceed with the tests outlined in Section 1.4 of the Healy Systems Scheduled Maintenance. <br /> Figure 1 Figure 2 <br /> Top Clamp <br /> Bottom Clamp <br /> Tool Grip <br /> Figure 3 Figure 4 <br /> Spare Shear <br /> Pin <br /> Shear Pin Installation <br /> Dowel Pin <br /> Shear Pin Bushing Hole <br /> Dowel Guide ''`' <br />