WORK PLANS - Laserfiche WebLink

Home Browse Search

6.0 PROTECTIVE ACTIONS 6.1 Personnel Protective Equipment Field personnel will wear equipment to protect against the potential physical and chemical hazards which have been identified herein and those that become apparent in the field. Level D protection will be required at a minimum for field activities at the site. Level D personal protective equipment to be used will include: ANSI-approved hard hat Chemical resistant gloves- disposable PVC Boots, steel toe and shank Boot covers Work clothes or Tyvek ANSI-approved safety glasses (for drilling activities) Safety goggles or a face shield should be used when a foreseeable splash hazard exists Additional equipment will be readily available to upgrade to modified Level C protection, if necessary. This equipment includes: Full-face or half-face air purifying respirator with high efficiency particulate/organic vapor cartridges Chemical resistant gloves; inner glove -disposable PVC and outer glove - NBR/Nitrile Boot covers Boots, chemical resistant, steel toe and shank Safety goggles or a face shield should be used when a foreseeable splash hazard exists The level of protection employed may be upgraded, as deemed necessary by the SSO or FSSO. If non-routine field activities are initiated, the level of protection will be specified in the activity-specific health and safety addenda. 6.2 Work Zones Work zones including designation of an Exclusion Zone, a contamination Reduction Zone, and a Support Zone will be established for any field activity which requires Level C protection or greater. Work zones will be clearly marked in the field. Work zones may vary depending on the proposed field activity and will be established in the activity-specific health and safety addenda. 3!7196 3:09 PM 6 952704.01 9:l obs�952704.01\h&splan.doc