SU0012613 - Laserfiche WebLink

Home Browse Search

4. Each parking stall shall be an unobstructed rectangle, minimum nine (9) feet wide and twenty (20) feet long. (Development Title Section 9-1015.5[b]) 5. Each truck parking stall shall bean unobstructed rectangle, minimum fifteen (15)feet wide and twenty-five (25)feet long. (Development Title Section 9-1015.6[c][1]). e. ACCESS AND CIRCULATION: The following requirements apply and shall be shown on the Site Plan: 1. Access driveways shall have a width of no less than twenty-five (25)feet for two-way aisles and sixteen (16) feet for one-way aisles, except that in no case shall driveways designated as fire department access be less than twenty(20)feet wide. (Development Title Section 9-1015.5[h][1]) 2. The design of the driveway and traffic circulation plan for the site shall be incorporated into the construction plans. f. LIGHTING: Lighting shall be provided and comply with the following: 1. If the parking area is to be used at night, parking lot and security lighting shall be installed. (Development Title Section 9-1015.5[g]) 2. Any lighting shall be designed to confine direct rays to the premises. No spillover beyond the property lines shall be permitted except onto public thoroughfares, provided, however, that such light shall not cause a hazard to motorists. (Development Title Section 9-1015.5[g][4]) g. LANDSCAPING: Landscaping shall be provided and comply with the following: 1. A minimum ten (10) foot wide landscaped strip, respecting the ultimate right-of-way width of South Harlan Road, shall be installed across the frontage of the project site. (Development Title Section 9-1020.5[c]) 2. Areas of the property which are not a part of the project shall be barricaded from traffic and kept mowed and dust free. h. SIGNS: Sign details shall be consistent with Chapter 9-1710 of the Development Title and be included on the Site Plan. All portions of any sign shall be set back a minimum of five (5)feet from any future right-of-way line, including any corner cut-off(snipe). (Development Title Section 9-1710.2[g]) i. BUILDING CODE REQUIREMENTS: The following California Building Code (CBC) and San Joaquin County Ordinance requirements will be applicable to the proposed project. The following conditions shall be addressed prior to submittal of a building permit application to the Building Inspection Division: 1. A building permit for each separate structure or building is required. Submit plans, Specifications and supporting calculations, prepared by a Registered Design Professional (architect or engineer) for each structure or building, showing compliance with the 2016 California Building, Existing Building, Mechanical, Plumbing, Electrical, Energy and Fire Codes as may be applicable. Plans for the different buildings or structures may be combined into a single set of construction documents. 2. A grading permit will be required for this project. Submit plans and grading calculations, including a statement of the estimated quantities of excavation and fill, prepared by a Registered Design Professional. The grading plan shall show the existing grade and finished grade in contour intervals of sufficient clarity to indicate the nature and extent of the work and show in detail that it complies with the requirements of the code. The plans shall show the PA-1900025—Conditions of Approval 2