Laserfiche WebLink
supporting calculations, prepared by a Registered Design Professional (architect or engineer) <br /> for the sign, showing compliance with The 2016 California Building, Electrical, Energy and Fire <br /> Codes as may be applicable. <br /> (2) A grading permit will be required. for this project. Submit plans and grading calculations, <br /> including a statement of the estimated quantities of excavation and fill, prepared by a <br /> Registered Design Professional. The grading plan shall show the existing grade and finished <br /> grade in contour intervals of sufficient clarity to indicate the nature and extent of the work and <br /> show in detail that it complies with the requirements of the code. The plans shall show the <br /> existing grade on adjoining properties in sufficient detail to identify how grade changes will <br /> conform to the requirements of the code. <br /> (3) The required plans must be complete at the time of submittal for a building permit. Plans must <br /> address building design and construction, fire and life safety requirements, accessibility and <br /> show compliance with the current California codes and San Joaquin County ordinances. <br /> (4) A soils report is required pursuant to CBC§ 1803 for foundations and CBC appendix§J 104 <br /> for grading. All recommendations of the Soils Report shall be incorporated into the <br /> construction drawings. <br /> 2. DEPARTMENT OF PUBLIC WORKS(Contact:[209]468-3000, see memo dated May 7, 2019) <br /> 3. DEPARTMENT OF TRANSPORTATION (Contact: [209]948-7190, see memo dated April 10, 2019) <br /> NOTES AND INFORMATION ONLY: <br /> See Environmental Health Department letter dated April 10, 2019. <br /> See San Joaquin Council of Governments letter dated November 29, 2017. <br /> See Central Valley Regional Water Quality Board letter dated April 18, 2019. <br /> PA-1900060 (SA) Conditions of Approval 2 <br />