Laserfiche WebLink
Sparg er Analytical Laboratory Division <br /> TechnologyMobile Laboratory Division <br /> Inc. Scientific Division <br /> i With Automation in Mind <br /> I Sample Description <br /> See attached Samples Description Information. <br /> The samples were received under chain-of-custody. <br /> II Analysis Request <br /> The following analytical tests were requested: <br /> Lab ID Your ID Analysis Description <br /> ST95-01-574A MW-1 TPHdiesel <br /> ST95-01-576A MW-2 TPHdiesel <br /> ST95-01-578A MW-3 TPHdiesel <br /> ST95-01-580A MW-4 TPHdiesel <br /> �✓ ST95-01-582A MW-5 TPHdiesel <br /> ST95-01-584A MW-6 TPHdiesel <br /> III Quality Control <br /> A. Project Specific QC. No project specific QC (i.e., spikes and/or <br /> duplicates) was requested. <br /> B. Method Blank Results. A method blank is a laboratory-generated <br /> sample which assesses the degree to which laboratory operations and <br /> procedures cause false-positive analytical results for your sample. <br /> No target parameters were detected in the method blank associated with <br /> your sample at the reporting limit levels noted on the data sheets in the <br /> Analytical Results section. <br /> Accuracy is measured by Percent Recovery as in: <br /> % recovery = (measured concentration) x 100 <br /> (actual concentration) <br /> IV Analysis Results <br /> Results are on the attached data sheets. <br /> 3050 Fite Circle, Suite 112 9 Sacramento, California 95827 • (996) 362-8947 • FAX(916) 362-0947 <br />