Laserfiche WebLink
DISCO PROPERTY,STOCKTON,CALIFORNIA <br /> Table 1 Summary of 1997 Workplan for Disco Property and Addendum Modifications and Additions <br /> 1997 Workplan Activities 1998 Addendum Modifications/Additions <br /> • Develop and sample new wells. All new wells to be surveyed after completion of additional <br /> investigation, ; <br /> Laboratory Analysis: <br /> • Soil from distinct lithologic units in SB97-3 sampled and tested for May add undisturbed density and specific gravity for porosity <br /> permeability,dry bulk density,moisture,and TOC. determination. <br /> • 3 to 4 soil samples per boring submitted to certified laboratory for Additional analyses for gasoline additives MTBE,TAME,DIPE,ETBE, <br /> testing for TPH&BTEX. TBA. <br /> Reporting • <br /> Letter report summarizing findings of Activity I including boring logs, Deleted from Activity I;one report to be submitted discussing all <br /> tabulated laboratory results,and recommendations for Activities II and workplan and addendum activities at the completion of activity III. <br /> III <br /> Activity II-Downgradient of Former Disco Tanks <br /> Prefield Activities: Delete well survey update—already complete. <br /> • Update well survey <br /> • Clear utilities <br /> • Obtain drilling permits <br /> • Obtain encroachment permit from Caltrans <br /> Field Activities: • Exact locations and depths of borings to be determined after CPT& <br /> • Two to three or more shallow borings located south of Disco groundwater screening. <br /> property continuously logged to a depth of 10 feet below • Soil samples to be collected based on highest PID readings, <br /> groundwater table. One or two borings converted into shallow preferably in clayey or silty strata. <br /> monitoring wells. <br /> • One to two deep borings continuously logged in the vicinity of • One or more of these borings may be continuously cored,if the CPT <br /> shallow wells.One or both completed as monitoring wells screened is unable to advance to 150 feet bgs. <br /> same depth as MW-11D • Soil samples for analysis should be collected from historic high and <br /> low ground water elevation equivalents and the top of the current <br /> groundwater table,preferably in clayey or silty strata and where <br /> field screening indicates elevated constituents may be present. <br /> 5 <br />