Laserfiche WebLink
1 <br /> Site Background Information - Guardmo and Crawford <br /> Page 5 of 6 <br /> STRATIGRAPHY <br /> In general,brown, dry to damp silty clay, clayey silt, and clay was encountered from surface grade <br /> to approximately 15 feet bsg From 15 feet to approximately 33 feet bsg, sandy material was <br />' encountered,grasp size increased with depth,and sub-rounded pebbles were present with diameters <br /> as large as '/z inch From 33 feet to 41 feet bsg, clay, silty clay, and clayey silt were primarily <br /> encountered Alternating layers of silty and sandy material were identified from approximately <br /> 41 feet bsg to the total depth of boring CPT-1 <br /> i <br /> I <br />' HYDROGEOLOGIC MODEL <br /> Based on the CPT results and comparison with soil descriptions from borings previously advanced <br />' on the site, AGE has developed a preliminary subsurface model of the site soil stratigraphy <br /> comprised of six informal zones-a vadose(unsaturated)zone and five hydrologic units Hydrologic <br />' units may be defined as significant vertical intervals of soil having significant lateral extent and <br /> having similar hydrologic characteristics(i e hydraulic conductivity,transmissivity,etc )over their <br /> vertical and horizontal extents A `flow unit' may be defined as a hydrologic unit characterized by <br />' significantly greater hydraulic conductivity values than the overlying and underlying units A flow <br /> unit is capable of serving as a preferred migration route, and could potentially allow migration of <br /> large contaminant masses over great distances <br /> The model presented is interpretational and will be modified as more data is collected The six <br /> vertical zones identified are as follows(depths are approximate and can vary by several feet across <br /> the site) <br /> Vadose Zone - Extending from surface grade to approximately 17 feet bsg, the vadose zone is <br />' composed primarily of silt and sandy silt underlain by an approximately 5-foot layer of clayey silt, <br /> silty clay, and clay This zone is characterized by low to moderate pore pressures <br />' HU1 - HU1 extends from approximately 17 feet to 33 feet bsg and is composed primarily of fine <br /> sand with low to moderate to pore pressures in the upper 5 feet of the zone,with sandy silt grading <br /> to gravelly sand below This zone is characterized by low pore pressures and may be considered a <br />' flow unit <br /> HU2-HU2 extends from approximately 33 feet to 43 feet bsg This zone consists primarily of clay, <br />' clayey silt, and silty clay This zone is characterized by generally low pore pressure, except for a - <br /> high-pressure peak at the bottom of the unit associated with very fine sands or less permeable clayey <br />' matenal <br /> • HU3 -Extending from 43 feet to approximately 55 feet bsg, HU3 is composed primarily of layers <br />' Advanced GeoEnvironmental Inc <br /> 1 <br />