Laserfiche WebLink
a� <br /> will be decontaminated prior to commencing drilling at each <br /> hole. Well construction materials will be cleaned as <br /> necessary, prior to installation. <br /> Equipment and will material decontamination will be <br /> conducted on an impermeable surface and all decontamination <br /> effluent will be contained. All surfaces of the equipment <br /> will be thoroughly decontaminated using a steam cleaner. <br /> The equipment will be placed on a drying rack for air <br /> drying. The decontamination water will stored in containers <br /> certified for hazardous materials storage and disposed of in <br /> an approved manner. <br /> I <br /> Sample equipment to be used for pesticides and organic <br /> analysis will be washed in a nonphosphate detergent (Alconox <br /> or equivalent) and rinsed with tap water, followed by <br /> deianized water ann finally with acetone. 1f the equipment <br /> is for acetals analysis, the initial rinse will be conducted <br /> with 0.1 N nitric acid followed by tap water and deionized <br /> +m+ water. <br /> 7.0 Field Equipment Calibration and Maintenance <br /> The following measuring equipment may be used during the <br /> � = Remedial Investigation. Equipment is grouped by field <br /> activity. Calibration procedures and frequency are listed <br /> oil for each piece. <br /> it <br /> Soil Borings and Well Dimensions-Steel and coated cloth <br /> � .., tape. Calibration: none. <br /> Water Level Measurements in Wells- Steel surveyors tape. <br /> Calibration: manufacturer supplied temperature correction <br /> ` will be applied as applicable for field conditions. <br /> x Electrical Well sounders. Calibration: check against steel <br /> surveyor's tape. <br /> E9 <br /> Organic Vapors- Photoionization detector. Calibration: <br /> Daily field Calibration using a isobutylene standard as per <br /> f <br /> a manufacturers instructions, <br /> the Groundwater pH Measurement- Digital piA meter. Calibration: <br /> standard pH solutions of 4, 7, and 10 will be utilized for <br /> i daily field calibration according to manufacturers <br /> cd instructions. <br /> � a Electrical Conductivity- Electrical conductivity meter. <br /> Calibratior: factory-calibrated annually and periodically <br /> calibrated against laboratory prepared standard calibration <br /> to <br /> solution. <br /> Dater Temperature- Mercury or digital thermometers. <br /> Calibration: factory-calibrated once. <br /> t <br /> I � <br /> f <br /> I <br />