Laserfiche WebLink
ATC Associates Inc. <br /> Quality Assurance-Qualit-•Control Plan <br /> Revised Novemher 2002 <br /> parameters have stabilized, a sample will be collected after the water level approaches 30 percent <br /> of its initial elevation. Where water level recovery is slow, the sample will be collected after <br /> stabilization is achieved and enough water is present to fill sample containers. <br /> Cross contamination from transferring pumps (or bailers) from well to well will be avoided by <br /> utilizing dedicated equipment. Where this is not feasible, thorough cleaning of equipment will <br /> be performed between sampling rounds. Sampling will proceed from the least contaminated to <br /> the most contaminated well, if information is available before sample collection, or if it is <br /> indicated by field evidence. Where several types of analysis will be performed for a given well, <br /> individual samples will be collected in the following order: <br /> 1. Volatile Organics <br /> 2. Purgeable Organic Carbon <br /> • J. Purgeable Organic Halogens <br /> 4. Total Organic Carbon <br /> 5. Total Organic Halogens <br /> 6. Extractable Organics <br /> 7. Total Metals <br /> S. Dissolved Metals <br /> 4. Phenols <br /> 10. Cyanide <br /> The specific analytical methods be utilized for the common volatile/semivolatile to analyses are <br /> shown on Table 2. <br /> Groundwater samples will be collected with a teflon bailer with bottom emptying device. <br /> Duplicate samples will be transferred to vials or containers that meet Regional Board <br /> specif cations. Groundwater from the bailer will be transferred to the sample container by <br /> allowing the fluid to flow slowly along the sides of the vessel. All containers will be filled above <br /> w-ladminlshe1lslgagc-02.doc <br /> 14 <br />