Laserfiche WebLink
Item <br />Task <br />Status <br />Comments <br />5.5 Strainer <br />b. Access strainer <br />❑Yes ❑No* ❑N/A <br />basket and check cap <br />and gasket seal as <br />well as bolts. <br />5.6 Filter <br />a. Check that the filter <br />❑Yes ❑ No* ❑ N/A <br />is in good condition <br />and is within the <br />manufacturer's <br />expected service life. <br />Replace, if necessary. <br />b. Check for leaks and <br />❑Yes ❑ No* ❑ N/A <br />decreased fuel flow <br />5.7 Flame <br />Follow manufacturer's <br />❑Yes* ❑ No ❑N/A <br />arrestors <br />instructions. Check for <br />corrosion and <br />blockage of air <br />passages. <br />5.8 Leak detector <br />Test according to <br />❑Yes ❑No* ❑N/A <br />for <br />manufacturer's <br />submersible <br />instructions and <br />pump <br />authority having <br />systems <br />jurisdiction (AHJ). <br />Verify leak detectors <br />are suited and <br />properly installed for <br />aboveground use. <br />5.9 Liquid level <br />a. Has equipment <br />❑Yes ❑No* ❑N/A <br />equipment <br />been tested to ensure <br />proper operation? <br />b. Does equipment <br />❑Yes ❑No* ❑N/A <br />operate as required? <br />c. Follow <br />❑Yes []No* ❑ N/A <br />manufacturer's <br />instructions <br />5.10 Overfill <br />a. Follow <br />❑Yes ❑No* ❑N/A <br />equipment <br />manufacturer's <br />instructions and <br />regulatory <br />requirements for <br />inspection and <br />functionality <br />verification. <br />b. Confirm device is <br />❑Yes ❑No* ❑N/A <br />suited for above <br />ground use by the <br />manufacturer <br />AST INSPECTION STANDARD 11 SEPTEMBER 2011 <br />COPYRIGHT© 2011 Steel Tank Institute <br />