SU0012847 - Laserfiche WebLink

Home Browse Search

4. Each parking stall shall be an unobstructed rectangle, minimum nine (9)feet wide and twenty(20)feet long. (Development Title Section 9-1015.5[b]) e. ACCESS AND CIRCULATION: The following requirements apply and shall be shown on the Site Plan: 1. Access driveways shall have a width of no less than twenty-five (25) feet for two-way aisles and sixteen (16) feet for one-way aisles, except that in no case shall driveways designated as fire department access be less than twenty(20)feet wide. (Development Title Section 9-1015.5[h][1]) f. SIGNS: Signs shall be provided and comply with the following: 1. SIGNS: Sign details shall be consistent with Chapter 9-1710 of the Development Title and be included on the Site Plan. All portions of any sign shall be set back a minimum of five (5) feet from any future right-of-way line, including any corner cut off (snipe). (Development Title Section 9-1710.2[g]) g. ANIMAL REGULATIONS: The following animal regulations apply and shall be provided: 1. All animal enclosures, including but not limited to pens, cages, and feed areas, shall be maintained free from litter, garbage, and excessive accumulation of manure, so as to discourage the proliferation of flies, other disease vectors, and offensive odors. Premises shall be maintained in a neat and sanitary manner. (Development Title Section 9- 1045.4[b]) 2. Poultry shall be kept or maintained a minimum distance of 100 feet from the nearest property line. (Development Title Section 9-1045.3) g. BUILDING CODE REQUIREMENTS: The following California Building Code (CBC) and San Joaquin County Ordinance requirements will be applicable to the proposed project. The following conditions shall be addressed prior to submittal of a building permit application to the Building Inspection Division: 1. A building permit for each separate structure or building is required. Submit plans, Specifications and supporting calculations, prepared by a Registered Design Professional (architect or engineer)for each structure or building, showing compliance with The 2016 California Building, Existing Building, Mechanical, Plumbing, Electrical, Energy and Fire Codes as may be applicable. Plans for the different buildings or structures may be combined into a single set of construction documents. 2. A grading permit will be required for this project. Submit plans and grading calculations, including a statement of the estimated quantities of excavation and fill, prepared by a Registered Design Professional. The grading plan shall show the existing grade and finished grade in contour intervals of sufficient clarity to indicate the nature and extent of the work and show in detail that it complies with the requirements of the code. The plans shall show the existing grade on adjoining properties in sufficient detail to identify how grade changes will conform to the requirements of the code. 3. The required plans must be complete at the time of submittal for a building permit. Plans must address building design and construction, fire and life safety requirements, Planning Commission Staff Report, Item # 1 02/06/2020 — PA-1800316 (UP) 4 Conditions of Approval