Laserfiche WebLink
Section 8. Exposure controls/personal protection <br /> Respiratory protection Based on the hazard and potential for exposure,select a respirator that meets the <br /> appropriate standard or certification. Respirators must be used according to a <br /> respiratory protection program to ensure proper fining,training,and other important <br /> aspects of use. <br /> Section 9. Physical and chemical properties <br /> Appearance <br /> Physical state Liquid. <br /> Color Not available. <br /> Odor Not available. <br /> Odor threshold Not available. <br /> pH Not available. <br /> Melting point Not available. <br /> Boiling point 1170C(242.60F) <br /> Flash point Closed cup: 380C (100.40F)[Pensky-Martens Closed Cup] <br /> Evaporation rate 0.43 (butyl acetate= 1) <br /> Flammability(solid, gas) Not available. <br /> Lower and upper explosive Lower. 1.4 <br /> (flammable)limits Upper. 11.2% <br /> Vapor pressure 0.73 kPa(5.5 mm Hg)[at 20*C] <br /> Vapor density 2.55 [Air= 1] <br /> Relative density 1.35 <br /> Solubility Not available. <br /> Partition coefficient: n- Not available. <br /> octanol/water <br /> Auto-ignition temperature Not available. <br /> Decomposition temperature Not available. <br /> Viscosity Kinematic(40"C(104"F)): >0.205 cm'/s(>20.5 cSt) <br /> Molecular weight Not applicable. <br /> Aerosol product <br /> Heat of combustion 19.443 kJ/g <br /> Section 10. Stability and reactivity <br /> Reactivity No specific test data related to reactivity available for this product or its ingredients. <br /> Chemical stability The product is stable. <br /> Possibility of hazardous Under normal conditions of storage and use, hazardous reactions will not occur. <br /> reactions <br /> Conditions to avoid Avoid all possible sources of ignition (spark or flame). Do not pressurize,cut,weld, <br /> braze,solder,drill,grind or expose containers to heat or sources of ignition. Do not <br /> allow vapor to accumulate in low or confined areas. <br /> Incompatible materials Reactive or incompatible with the following materials: <br /> oxidizing materials <br /> Hazardous decomposition Under normal conditions of storage and use, hazardous decomposition products should <br /> products not be produced. <br /> Date ofissue/Dem ofra w. :9/5,2011 Date ofpevious issue :5181N11 Venion :4 8114 <br />