ARCHIVED REPORTS_XR0012608 - Laserfiche WebLink

Home Browse Search

ME C* K• _ �E December 4, 1989 Site Safety Plan AGS 38032-3S Unocal Station No. 6981, Stockton, California 2. Examine face piece plastic center shell for cracks, missing components, or damaged threads. 3, Examine harness for breaks, cuts, frays, tears, and missing or damaged hardware. 4. Examine inhalation and enotlation valves anallow the valve tseats o closecompletely. Check that foreign matter which may tailed and are not distorted. valves are properly ins 5. signs of abuse or damage. Discard damaged items, Examine cartridges forust be orted 6. Any respirator malfunction or deficienciesafetyed m 0fficer who will issueta new Health and Safety Coordinator or B only approved spare parts from the r, respirator or correct thneed of repair. Sare parts from any e deficiencies using y PP manufacturer of the smodel ae not be used'under any conditions Inst uct ons n the other manufacturer m y manufacturer should be followed when the respirator manual provided by the needs repairing or replacing. B. Cleaning 1. Unthread cartridges or filters. 2. Wash the face piece after use, with warm water and a mild detergent. person. The in should face piece if it was use 3. Disinfect thesinfected even if d b another pby routinely (once per month) be disoiution may baro eidator(i.e. 25ed tablesploons on- individual. A hypochlorite chlorine bleach per gallon of water for an acceptable solution). ` 4. After cleaning and air-drying, check that the face piece is not damaged and e that components removed prior to cleaning have been installed properly. C. Storage taleage box in a heat- sealed or resea Place the respirator in its stastic r ace and exhalation valve in an approximately bag. Store flat,with the face p normal position, to prevent the face seal from taking a permanent "set. E 2, Replacement components should be stored in sealed packages in a cool, clean, low-humidity location until ready for use.