Laserfiche WebLink
Site Safety Plan-October 14, 1992 <br /> BP Oil Facility No.1.1191, Stockton, CA Working To Restore. Nature <br /> Cartridges designed and .specified to protect the wearer.against airborne particles are not <br /> appropriate for protection againstgases:and vapors. Cartridges designed and specified for <br /> protection against specific gases and vapors are not appropriate for protection against airborne <br /> particles or other gases or vapors beyond the scope of that type of cartridge.. Every cartridge is <br /> labeled with specific instructions defining the use andlimitations of that particular type of cartridge. <br /> If the label is missing or.the type of cartridge is inappropriate-then it may.not be used under any <br /> .circumstances; it will provide little or no protection to the wearer. <br /> Danger Signals'.Indicating Possible Respirator Failure <br /> If any of the danger signals in the following list are experienced while wearing a respirator, <br /> immediately return-to a fresh air.environment...The cartridges or filters may be inappropriate or <br /> used up, or abnormal conditions may be creating.vapor concentrations which are beyond the limits <br /> of the-cartridges or filters. Danger is indicated when the individual subject to exposure: <br /> • Smells'or tastes,chemicals,or if eyes, nose, or throat become irritated; <br /> • Has difficulty breathing; <br />! Notices that the breathing air becomes uncomfortably warm; <br /> Experiences headaches, dizziness,cramps, nausea,or blurred vision; <br /> I - <br /> f Experiences changes in complexion or skin discoloration; <br /> • Experiences changes in motor coordination,personality,or demeanor; <br /> • Experiences changes in speech-ability-or pattern; <br /> • Experiences excessive salivation or changes in pupillary response. <br /> _Qualitative Respirator Fit Test <br /> "Qualitative ft testing of each respirator must be.conducted before the respirator may be used to <br /> check that a-good fit is still obtained. The following steps should be taken in qualitative fit test of <br /> the respirator. <br /> I. Don the face piece with cartridge or filters in place. Pull straps together and equally <br /> to avoid distorting the mask. <br /> 2. Adjust the face piece. Do not overtighten it. <br /> 3 <br /> 17050-01ssP 9 <br /> 4 <br />