Laserfiche WebLink
M47 <br /> June 21, 1991 <br /> ARCO Station No. 548 <br /> r, <br /> C) In the event the face piece cannot be adjusted so there is no leakage, <br /> DO NOT ENTER THE AREA REQUIRING renstyle PROTECTION.ION.ze face piece to your particular facial features,proper facia! fit. <br /> may be required to obtain a prop <br /> Note: Failure to perform a qualitative fit test of the respirator each time the <br /> respirator is donned may result in little or no respiratory protection. <br /> Inspection. Cleaning, and Storage <br /> The respirator should be inspected, cleaned, and properly stored after use each day. The <br /> following steps are the basic elements of each procedure: <br /> A. Inspection <br /> for rips, tears, holes, deformation, or stiffness. <br /> 1. Examine face seal <br /> 2 Examine face piece plastic center shell for cracks, missing components, or <br /> an <br /> damaged threads. <br /> 3. Examine harness for breaks, cuts, frays, tears, and missing or damaged i <br /> hardware. <br /> r cu , cracks, or <br /> 4. Examine inhalation and exhalation alves valve to ecly eseats fo <br /> completelytsCheck that <br /> foreign matter which may not allow <br /> valves are properly installed and are not distorted. i <br /> 5. Examine cartridges for signs of abuse or damage. Discard damaged items. <br /> An respirator malfunction or deficiencies noted must be reported to the <br /> 6. Y <br /> anch <br /> Health and Safety C <br /> inat <br /> respirator or correctfficer who will issue a new <br /> tt eddeticenci or orB using only apSafety Oproved spare parts from the <br /> from any <br /> manufacturer of the specific model in need of copdition Spare nspruct ons in the <br /> other manufacturer may not be used under any <br /> _ manual provided by the manufacturer should be followed when the respirator <br /> needs repairing or replacing. <br /> 11 <br /> w AGS 30764dS <br />