Laserfiche WebLink
GROUNDWATER TECHNOLOGY, INC. <br /> STANDARD OPERATING PROCEDURE NO. 11 <br />• CHAIN-OF-CUSTODY PROTOCOL <br /> 1. Samples must be maintained under custody until shipped or delivered to the laboratory. <br /> The laboratory will then maintain custody. A sample is under custody if: <br /> al It is in your possession <br /> b) It is in your view after being in your possession <br /> c) You locked it up after it was in your possession <br /> d) It is in a designated secure area <br /> 2. Custody of samples may be transferred from one person to another. Each transferrer <br /> and recipient must date, sign and note the time on the chain-of-custody form. <br /> 3. In shipping, the container must be sealed with tape, and bear the sender's signature <br /> across the area of bonding at the ends of the tape to prevent undetected tampering. <br />• `Eacti sampling jar should be taped and signed as well. Scotch tape works well. <br /> 4. Write "sealed by" and sign in the "Remarks" box at the bottom of the form before <br /> sealing the box. Place form in a plastic bag and seal it inside the box. <br />• 5. The 'REMARKS" section of the form is for documenting details such as: <br /> a) Correlation of sample numbers if samples are split between labs. <br /> b) QC numbers when lab is logging in the samples. <br /> c) Sample temperature and condition when received by lab_ <br />• d) Preservation notation. <br /> e) pH of samples when opened for analysis (if acidified). <br /> f) Sampling observation or sampling problem. <br /> 6. The chain-of-custody form should be included inside the shipping container. A copy <br /> should be sent to the project manager. <br /> 7. When the samples are received by the lab, the chain-of-custody form will be dated, <br /> signed, and the time noted by a laboratory representative. The form will be retained in <br /> the laboratory files along with shipping bills and receipts . <br /> 8. At the time of receipt of samples by the laboratory, the shipping container will be <br /> inspected and the sealing signature will be checked. fle samples will be inspected for <br /> condition and bubbles, and the temperature of a representative sample container will be <br />• <br /> CONCORD-SOP 121941 Pape l of 2 <br /> L <br /> J(PI GROUNDWATER <br /> TECHNOLOGY,INC. <br />