Laserfiche WebLink
4Emeco <br /> A Coming Company <br /> I Sample Description <br /> • See the attached Sample Description Information. <br />• The samples were received under chain-of-custody. <br /> II Analysis Request <br /> The following analytical test was requested. <br /> Lab ID Analysis Description <br /> 061050-1 thru 6 Total Petroleum Hydrocarbons (Gasoline) and BTEX <br /> III Quality Control <br /> A. Project Specific OC. No project specific QC (i .e. , spikes and/or <br /> duplicates) was requested. <br />• B. Method Blank Results. A method blank is a laboratory-generated <br /> sample which assesses the degree to which laboratory operations <br /> and procedures cause false-positive analytical results for your <br /> samples. <br /> . No target parameters were detected in the method blanks associated <br /> with your samples at the reporting limit levels noted on the <br /> Method Blank Report. <br /> C. Laboratory Control Samples - The LCS Program <br /> Duplicate Control Samples. A DCS is a well-characterized matrix <br />• (blank water, sand or celite) which is spiked with certain target <br /> parameters and analyzed at approximately 10% of the sample load in <br /> order to establish method-specific control limits. The DCS <br /> results associated with your samples are on the attached Duplicate <br /> Control Sample Report. <br />• Accuracy is measured by Percent Recovery as in: <br /> recovery = (measured concentration) x 100 <br /> (actual concentration) <br /> Precision is measured using duplicate tests by Relative Percent Difference <br />• (RPD) as in: <br /> RPD = M recovery test I - % recovery test 21 x 100 <br /> (% recovery test 1 + % recovery test 2)/2 <br />