Laserfiche WebLink
s rT } <br /> t F s <br /> Site Safety Plan-October 14, 1992 AFM <br /> BF Oil Facility No.1t 193, Stockton, CA <br /> Working To Restore Nature <br /> Cartridges designed and specified to protect the wearer against airborne particles are not <br /> appropriate for protection against gases and vapors. Cartridges designed and specified for <br /> protection against specific gases and vapors are not appropriate for protection against airborne <br /> particles or other gases or vapors beyond the scope of that type of cartridge. Every cartridge is <br /> labeled with specific instructions defining the use and limitations of that particular type of cartridge. <br /> If the label is missing or the type of cartridge is inappropriate then it may not be used under any <br /> circumstances; it will provide little or no protection to the wearer. <br /> Danger Signals Indicating Possible Respirator Failure <br /> If any of the danger signals in the following list are experienced while wearing a respirator, <br /> immediately return to a fresh air environment. The cartridges or filters may be inappropriate or <br /> used up, or abnormal conditions may be creating vapor concentrations which are beyond the limits <br /> of the cartridges or filters. Danger is indicated when the individual subject to exposure: <br /> • Smells or tastes chemicals,or if eyes, nose, or throat become irritated; <br /> • Has difficulty breathing; <br /> • Notices that the breathing air becomes uncomfortably warm; <br /> • Experiences headaches, dizziness,cramps, nausea, or blurred vision; <br /> • Experiences changes in complexion or skin discoloration; <br /> Experiences changes in motor coordination,personality,or demeanor; <br /> Experiences changes in speech ability or pattern; <br /> • Experiences excessive salivation or changes in pupillary response. <br /> Qualitative Respirator Fit Test <br /> Qualitative fit testing of each respirator must be conducted before the respirator may be used to <br /> check that a good fit is still obtained. The following steps should be taken in qualitative fit test of <br /> the respirator. <br /> 1. Don the face piece with cartridge or filters in place. Pull straps together and equally <br /> to avoid distorting the mask. <br /> 2. Adjust the face piece. Do not overtighten it. <br /> 17051.01SSP 9 <br />