Laserfiche WebLink
II <br /> I <br /> _ f <br /> GR Field Methods and Procedures I` <br /> Groundwater Monitoring and Sampling <br /> Decontamination Procedures <br /> All physical parameter measuring and sampling equipment ate decontaminated prior to sample collection using <br /> Alconox or equivalent detergent followed by steam cleaning with deionized water. During field sampling, <br /> equipment placed in a well are decontaminated before purging or sampling the next well by cleaning with Alconox <br /> or equivalent detergent followed by steam cleaning with deionized water. <br /> Water-Level Measurements <br /> i. <br /> Prior to sampling each well,the static water level is measured using an electric sounder and/or calibrated portable <br /> oil-water interface probe. Both static water-level and separate-phase product thickness are measured to the nearest <br /> ±0.01 foot. The presence of separate-phase product is confirmed using a clean, acrylic or polyvinylchloride (PVC) <br /> bailer, measured to the nearest ±0.01 foot with a decimal scale tape. The monofilament line used to lower the <br /> bailer is replaced between borings with new line to preclude the possibility of cross-contamination. Field I <br /> observations (e.g. product color, turbidity,water color, odors, etc.) are noted. Water-levels are measured in wells 1 <br /> with known or suspected lowest dissolved chemical concentrations to the highest dissolved concentrations. <br /> Sample Collection and Labeling <br /> A temporary PVC screen is installed in the boring to facilitate a grab groundwater sample collection. Samples of <br /> groundwater are collected from the surface of the water in each well or boring using the teflon bailer or a pump. <br /> The water samples are then gently poured into laboratory-cleaned containers and sealed with teflon-lined caps, and <br /> inspected for air bubbles to check for headspace. The samples are then labeled by an adhesive label, noted in <br /> permanent ink, and promptly,placed in an ice storage. A Chain-of-Custody Record is initiated and updated <br /> throughout handling of the samples, and accompanies the samples to the laboratory certified by the State of <br /> California for analyses requested. <br /> i <br /> d <br /> I <br /> A-3 <br />