Laserfiche WebLink
1 <br /> Spargero Analytical Laboratory Division <br /> T6chnobgMobile Laboratory Division <br /> With Automation rn mind <br /> Y Inc Scientific Wsion <br /> III Quality Control <br /> A <br /> Project Specific QC No project specific QC (i e , spikes and/or <br /> duplicates) was requested <br /> B. Method Blank Results. A method blank is a laboratory-generated <br /> sample which assesses the degree to which laboratory operations and <br /> procedures cause false-positive analytical results for your sample <br /> ' No target parameters were detected in the method blank associated with <br /> your sample at the reporting limit levels noted on the data sheets in the <br /> Analytical Results section <br /> ' C. Laboratory Control Spike. <br /> A Laboratory Control Spike (LCS) is a <br /> sample which is spiked with known analyte concentrations, and analyzed <br /> at approximately 10% of the sample load in order to establish method- <br /> specific control limits The LCS results associated with your samples are <br /> ' on the attached Laboratory Control Spike and Laboratory Control Spike <br /> Duplicate Analysis Report <br /> ' D. Matrix Spike Results. A Matrix Spike is a sample which is spiked with <br /> known analyte concentrations, and analyzed at approximately 10% of the <br /> sample load in order to establish method-specific control limits The <br /> ' Matrix Spike results associated with your samples are on the attached <br /> Matrix Spike and Matrix Spike Duplicate Analysis Report <br /> Accuracy is measured by Percent Recovery as in <br /> % recovery = measured concentration) x 100 <br /> (actual concentration) <br /> ' IV Analysis Results <br /> Results are on the attached data sheets <br /> ' 3050 Fite Circle Suite 112 • Sacramento California 95827 9 (946) 362-8947 • FAX(946) 362-0947 <br />