Laserfiche WebLink
liqui-nox solution (1 %) <br /> Step 5 - Protective Coverall Removal (Optional - will be used at the Site Health and <br /> Safety Coordinator's discretion) With the assistance of a helper, remove protective <br /> coverall Deposit in container with plastic liner <br /> Equipment container (30-50 gallons) <br /> folding chairs <br /> plastic liners <br /> Step 6 - Respirator Removal (Optional - will be used at the Site Health and Safety <br /> Coordinator's discretion) Remove facepiece Avoid touching face with gloves If work <br /> is completed for the day, discard cartridges in lined container, and wash and rinse <br /> respirator following the procedures on page B-5 <br /> Equipment container (30-50 gallons) <br /> plastic liners <br /> Step 7 - Inner Glove Removal, (Optional - will be used at the Site Health and Safety <br /> Coordinator's discretion) Remove inner gloves and deposit in container with plastic <br /> liner <br /> Equipment container (20-30 gallons) <br /> plastic liners <br /> 14 Respirators will be cleaned daily by hand washing with MSA cleaner-sanitizer solution <br /> followed by a thorough rinse and air drying NEVER ALLOW A RESPIRATOR TO DRY <br /> WITH THE STRAPS PLACED FORWARD ACROSS THE FACESHIELD BECAUSE THIS <br /> MAY CAUSE CHANGES IN THE FACE-TO-FACE RESPIRATOR SEAL SURFACE The <br /> specific procedures to be employed are as follows <br /> A Remove all cartridges (canisters) and filters plus gaskets and seals not <br /> permanently affixed to their seats <br /> B Loosen harness adjustment straps <br /> C Remove exhalation valve cover <br /> D Remove inhalation and exhalation valves <br /> E Remove protective faceshield co er <br /> F Wash facepiece in MSA cleaner/sanitizer powder mixed with warm water, <br /> i <br /> Avalon Environmental Consultants 9627-001-2 <br /> Kashmar Singh joes Truck Stop <br /> October 20, 1998 Lathrop, California <br />