COMPLIANCE INFO_2016-2019 - Laserfiche WebLink

Home Browse Search

4.21 Schluter®-DILEX-AHK Material properties Installation Maintenance, and areas of application The suitability of Schluterl-DILIXX-AHK/- 1.Select SchluterO-DILE)(=AHK/-AHKAac- The visible surfaces of Sch]Uterl-DILD(- AHKA must be verified based on the an- cording to the-tile thickness. AHK/-AHKA require no special mainte- ated chemical stresses. Cementitious 2.Apply ticiP thin bed adhesive to areas where nance.Do not use abrasive cleaning agents materials, in conjunction with moisture, the perforated anchoring leg will be on sensitive surfaces.Damage to the ano- become alkaline.Since aluminium is sensi- placed,using a notched trowel. dised surfaces can be restored with paint. tive to alkaline substances,exposure to the 3.Press the perforated anchoring leg of alkali(depending on the concentration and SchluterI-DILD(-AHK/-AHKA securely duration of exposure)may result in corrosion into the setting material and align the (aluminium hydroxide formation). For this profile. i reason,remove mortar,or grouting or 4.Trowel additional setting material over the " immediately from all visible areas and do not perforated anchoring leg-to ensure full cover freshly installed coverings until dry. coverage: i. The profiles must be solidly embedded in S.Solidly embed the tiles and align flush with the setting material to prevent alkaline water the top of the profile.The tiles must be fully from accumulating in small cavities. embedded in the area of the profile. The profiles feature an anodised finish that 6.The tile is set abutting the lateral joint retains a uniform appearance during normal spacer,which creates an-everity spaced use, Protect the surface from abrasion or joint of approx. 1.5 mm. " scratching. Completely fill the space between the tile and the profile with grout. Note:where movement is expected at internal corners, leave a sufficiently wide joint between the tile and the profile and fill with elastomeric sealant. 7.Use materials and tools that will not scratch or cause other damage to sensi- tive surfaces. Grout and tile adhesive should be removed immediately. S.Matching preformed internal and external i corner pieces are available. i Note:Due to the asymmetrical design of inter E SchlOterl-DILIX-AHKA,the use of -nal and external comers is feasible only with the installation configuration shown r here. i i r. F F I.