Laserfiche WebLink
t <br /> File MH9061 Vol. 1 App. C Page 3 Issued: 1992-06-17 <br /> Revised: 2013-10-04 <br /> 7. Reichhold No. 33-403 and Dow 470 (75/25 percent by weight, <br /> respectively) <br /> 8. Ashland Chemical, Aropol 7241T-15 or -20 and Dow 470 <br /> (75/25 percent by weight, respectively) <br /> 9. Ashland 7241T-15 Iso 75 percent and Dow 470 V.E. <br /> 25 percent/Feldspar (65/35 percent by weight, respectively) <br /> 10. Aristech 12355 Iso/Dow 470 V.E. (75/25 percent by weight, <br /> respectively) <br /> 11. Aristech 12355 Iso 75 percent and Dow 470 V.E. <br /> 25 percent/Feldspar (65/35 percent by weight, respectively) <br /> 12. Dion 490(a) or Dion 495(a)/Feldspar (65/35 percent by weight, <br /> respectively) <br /> \ 13. Reichhold, Dion 490(a) or Dion 495(a) <br /> 14. CoRezyn 9571 Iso/Dow 470 V.E. (75/25 percent by weight, <br /> respectively) <br /> 15. Ashland Chemical, aropol 2592T. <br /> 16. Interplastic, COR75-AA-400. <br /> 17. AOC, F-764-XXX-YY" or "Vipel F764-XXX-YY1', where X is any letter <br /> A through Z and Y is any number 0 through 9. <br /> 18. AOC, F-774-XXX-YY or "Vipel F774-XXX-YY11, where X is any letter <br /> A through Z and Y is any number 0 through 9. <br /> )419. Ashland Chemical, Aropol D1813 <br /> (a) is any number 00-99 <br /> GENERAL <br /> The following examination and tests shall be conducted on samples <br /> 4 received from the Field Representative. Reference to "labels" below means <br /> labels affixed to fiberglass reinforced plastic (FRP) test surfaces. <br /> CONSTRUCTION <br /> The construction of the Label Products "LPL-FLV-1" labels shall be <br /> visually examined and shall be constructed, from top to bottom, as follows: <br /> 0.0009 in. clear overlamination <br /> 0.0006 in. adhesive <br /> black printing over yellow background <br /> 0.0034 in. vinyl <br /> 0.0009 in. adhesive <br /> EXPOSURE EVALUATION TESTS <br /> { Labels shall be exposed to each of the following conditions: <br /> 1. Standard Atmosphere - At least 72 h at 23°C (73°F) and <br /> 50 percent RH. <br /> 2. Air-Oven - Ten days in a circulating air oven (mechanical <br /> convection) at the test temperature specified below corresponding to the <br /> rated surface temperature indicated in Table I of this Procedure. <br /> Rated Surface Test Temperature, <br /> Temperature, °C (°F) °C (°F) y <br /> 80 (176) 105 <br /> (RECEI <br /> F <br /> AUG 202018 <br /> ENVIRONMENTAL HEALTH <br /> DEPARTMENT <br />