Laserfiche WebLink
iy k7 <br /> respectively Field activities and analytical results were detailed in Smith Technology's Summary Report <br /> • dated September 17, 1997 <br /> On March 24 and 25, 1998, ATC personnel supervised advancement of seven soil borings, (ASBI, <br /> MW4, MW5, MW6, MW7, SBS, and SB9) at the site to depths ranging from approximately 26 5 to 62 <br /> feet bgs These borings were advanced to 1) evaluate the horizontal and vertical extent of petroleum <br /> hydrocarbon impacted soil and groundwater, 2) evaluate and refine soil stratigraphy, and 3) install <br /> groundwater monitoring wells (MW4, MW5, MW6, and MW7) within the uppermost aquifer <br /> Groundwater samples collected from MW5, MW6, and MW7 contained elevated concentrations of TPHg <br /> and benzene Field activities and analytical results were detailed in ATC's Summary Report of <br /> Subsurface Investigation, dated August 14, 1998 <br /> In November 1999, ATC personnel supervised the advancement of three soil borings, SB9A, S1310, and <br /> S131 I SB 10 and SB 11 were advanced to 46 feet bgs using hollow stem auger techniques and S139A was <br /> advanced to 65 feet bgs using continuous core methods Field activities and analytical results were <br /> detailed in ATC's Summary Report of Groundwater and Soil Investigation, dated July 16, 1999 <br /> In March 2000, ATC personnel performed a vapor extraction and air sparge pilot test at the site The <br /> purpose of these tests was to evaluate vapor extraction and air spargmg as viable remedial options for <br /> impacted soil and groundwater at the site Specifically this included evaluation of whether vapor <br /> extraction could sufficiently capture air sparge off-gas, evaluation of short-term volatile organic <br /> compound (VOC) flux rates, and collection of data to design a vapor extraction/air sparge system The <br /> results of the pilot test are detailed in ATC's Vapor Extraction and Air Sparge Pilot Test Results and <br /> Feasibility Study at the Farmer Property, 610 North Hunter Street, Stockton, California, dated November 2, <br /> 2000 <br /> In December 2001, an ATC geologist supervised the advancement of five soil borings to depths of <br /> approximately 42 feet bgs and two soil borings to depths of approximately 26 feet bgs Three of the <br /> seven soil borings were completed as groundwater monitoring wells Of the remaining borings, two were <br /> completed as SVE wells, and two as AS wells Field activities and analytical results were detailed in <br /> ATC's Final Remediation Plan, Farmer Property, 610 North Hunter Street, Stockton, California, dated <br /> March 27, 2002 <br /> Additionally, in December 2001, an ATC geologist supervised the advancement of five Geoprobe <br /> borings, SB 12 to SB 16 to a depth of approximately 25 feet bgs Three additional offsite borings were <br /> advanced to depths of approximately 42 feet bgs and completed as groundwater monitoring wells, MW8 <br /> through MW 10 Field activities and analytical results were detailed in ATC's Offsite Subsurface <br /> Investigation Report, dated April 24, 2003 <br /> QUARTERLY GROUNDWATER MONITORING ACTIVITIES <br /> On March I and 2, 2005, ATC personnel collected groundwater samples from MW 1 through MW 10, <br /> VW1, VW2, and CW The locations of the monitoring wells are shown on Figure 2 Prior to collection <br /> of groundwater samples, the depth to water (DTW) was measured in the wells The pH, electrical <br /> conductivity, and temperature were measured in groundwater purged from the monitoring wells, and <br /> visual observations regarding turbidity were recorded A minimum of three well casing volumes was <br /> purged from each well prior to sampling The wells were allowed to recover and samples were collected <br /> from each well using dedicated disposable bailers Groundwater well purge and sample logs are <br /> contained in Attachment I <br /> • <br /> s\env uo1625961guan1yl1gr-2005 doc 2 ATC ASSOCIATES INC <br />