Laserfiche WebLink
Hrx£ <br /> TWINING EPA 8021 (MTBEBTEX) & EPA 8015M (TPH-Gasoline) <br /> ILABORATORIES , i N c LABORATORY CONTROL SPIKE <br /> FRESNO/MODESTO/VISAUA/BAKERSFIEW/SAUNAS QUALITY CONTROL REPORT <br /> Analyzed By: Eric Scott Reviewed By:J.Ureno <br /> Date of Extraction:03/01/03 Date of Analysis:03101103 <br /> Twining Laboratories,Inc.Batch ID Number:TL06030103 Sample Matrix:SOIL <br /> Spike ID:WS-1000 <br /> Constituent Method Blank Laboratory Laboratory Laboratory Acceptable Laboratory Laboratory Relative <br /> Concentration Control Spike Control Spike Control Percent Control Spike Control Spike Percent <br /> (mg(kg) Concentration Recovery Spike Recovery Range Percent Duplicate Difference <br /> j Level (mg/kg) Duplicate (%) Recovery Percent (%) <br /> (mg/kg) Recovery Low High (%) Recovery <br /> (mg/kg) (%) <br /> MTBEBTEX Surrogate(4-Bromofluorobenzene) 0.00 0.0625 0.0600 0.0659 80% 120% 96.0 105 9.37 <br /> Methyl Tertiary Butyl Ether 0.00 0.250 0.252 0.252 80% 120% 101 101 0 <br /> Benzene 0.00 0.0500 0.0500 0.0520 80% 120% 100 104 3.92 <br /> Toluene 0.00 0.0500 0.0470 0.0470 80% 120% 94.0 94.0 0 <br /> thylbenzene 0.00 0.0500 0.0520 0.0520 80% 120% 104 104 0 <br /> ylencs 0.00 0.150 0.141 0.146 80%1120% 94.0 97.3 3.48 <br /> TPH_Gasoline Surrogate(4-Bromofluorobenzene) 0.00 0.0625 0.0629 0.0626 80%1 126% 101 100 0.48 <br /> TPH-Gasoline 0.00 2.50 2.40 2.35 80%1120% 96.2 93.9 2.36 <br /> EXPLANATIONS: <br /> ND Non-Detectable;the target analyte was not found above the detectable limit for reporting purposes(DLR). <br /> mg/kg milligrams per kilogram,parts per million(ppm)concentration units. <br /> Method Blank: The method blank is used to determine if method analytes or other interferences are present in the laboratory environment, <br /> .. the reagents or equpiment. <br /> Laboratory Control Spike: A laboratory control spike is generated by adding the target analyte(s)into a relatively inert matrix(sodium sulfate or <br /> distilled water). The laboratory control sample is analyzed exactly like a sample,and its purpose is to determine whether <br /> the methodology is controlled and the laboratory is capable of making precise and accurate measurements. <br />