Laserfiche WebLink
Disabling the Functional Element Installing the System <br /> Syphon Housing <br /> /Assembly <br /> / Relief Valve <br /> Valve Core <br /> o Pump Discharge <br /> o /Head <br /> pumpsVotleb.eps <br /> Figure 13.Submerged Pump and Manifold for Tokheim Pumps <br /> Bennett Pumps <br /> The PLLD In-Line Check Valve and SwiftCheck Valve eliminate the need for the <br /> pump's relief valve.You must modify it as part of the PLLD system installation on <br /> Bennett pumps.Bennett pumps may have a siphon valve assembly or suspension valve <br /> assembly[Figure 14 on page 31]. <br /> 1. Disconnect any tubing from the siphon valve assembly,if present. <br /> 2. Remove the siphon or suspension valve assembly from the pump discharge head <br /> [Figure 14 on page 31].The assembly is located at the top of the pump on the side <br /> opposite the discharge ports. <br /> 3. Unscrew retainer plug from valve assembly.Remove spring and check valve and <br /> discard. It may be necessary to tap the valve housing to dislodge the check valve. <br /> 4. Reinstall retainer plug. <br /> 30 576013-902,Revision G <br />