Laserfiche WebLink
} cmc 'aii Environme/nial Network <br /> PAGE QR-1 <br /> f <br /> AEN (CALIFORNIA) ] <br />{ QUALITY CONTROL REPORT <br /> AEN JOB NUMBER: 9710372 <br /> CLIENT PROJECT ID: 90954. 0003 <br /> Quality Control and Pro,iect Summary <br /> All laboratory quality control parameters were found 'to be within established <br /> limits. <br /> y <br /> i <br /> F � i <br /> i <br />± a <br /> I e <br /> i <br /> i Definitions <br /> i <br /> Laboratory Control Sample (LCS)/Method Spikes(s): Control samples of known composition. LCS and Method Spike <br /> data are used to validate batch analytical results. <br /> i <br /> Matrix Spike(s): Aliquot of a sample (aqueous or solid) with added quantities of specific compounds and <br /> subjected to the entire analytical procedure. Matrix spike and matrix spike duplicate QC data are advisory. <br /> Method Blank: An analytical control consisting of all reagents, internal',(standards, and surrogate standards <br /> I carried through the entire analytical process. Used to monitor laboratory background and reagent contamination. <br /> J - <br /> Not Detected (ND): Not detected at or above the reporting limit. <br /> i <br /> Relative Percent Difference (RPD): An indication of method precision based on duplicate analyses. <br /> a <br /> Reporting Limit (RL): The lowest concentration routinely determined during laboratory operations. The RL is <br />+. generally 1 to 10 times the Method Detection Limit (MDL). Reporting limits are matrix, method, and analyte <br /> dependent and take into account any dilutions performed as part of the analysis.: <br /> ! Surrogates: Organic compounds which are similar to analytes of interest „in chemical behaviour, but are not found <br /> j in environmental samples. Surrogates are added to all blanks, calibration and check standardssamples, and <br /> spiked samples. Surrogate recovery is monitored as an indication of acceptable sample preparation and <br /> instrument performance. <br /> D: Surrogates diluted out. <br /> i <br /> I: Interference. <br /> i <br /> N !: Indicates result outside of established laboratory QC limits. <br /> i <br />