Laserfiche WebLink
MIL-A-8243B <br /> 2.2 Other publications - The following documents form a <br /> part of this specification to the extent specified herein. Unless otherwise <br /> indicated, the issue in effect on date of invitation for bids or request <br /> for proposal shall apply. <br /> American Society for Testing and Materials <br /> Book of ASTM Standards <br /> (Application for copies should be addressed to the American Society for <br /> Testing and Materials, 1916 Race Street, Philadelphia, Pennsylvania 19103.) <br /> 3. REQUIREMENTS <br /> 3.1 Material - The material shall be basically a mixture <br /> (and <br /> ethylene glycol and propylene glycol in a three to one ratio respectively, <br /> containing a corrosion-inhibiting compound and a wetting agent. The <br /> 0 terial shall be clear, transparent and homogeneous. <br /> N <br /> F # 3.2 Composition - The composition of the anti-icing and <br /> deicing-defrosting fluid furnished under this specification shall consist <br /> only of the four components as specified in Table I <br /> COMPOSITION TABLE I <br /> Component Percent by Weight Test <br /> MIN MAX. Paragranh <br /> 1, 2-glycols 88.0 - - 4.3.3 <br /> Water 9.0 10.0 4.3.4 <br /> Dibasic potassium phosphate(K2HPO4) 0.9 1.1 4.3.5 <br /> Sodium di-(2-ethylhexyl) 0.45 0.55 4.3.6 <br /> Sulfosuccinate (100 percent active) <br /> 3.3 Chemical and physical properties - The chemical and <br /> physical properties of the finished anti-icing and deicing-defrosting <br /> fluid shall, conform to the requirements specified in Table II. <br /> 2 <br />