Laserfiche WebLink
MIL-C-11796B <br /> 3.14 Flow point. The compound shall not material cannot be identified by batch, a lot <br /> flow at temperatures lower than the tempera- shall then consist of not more than 15,000 <br /> tures indicated below for the specified class pounds of the compound offered for delivery <br /> (see 4.6.10). at onetime. <br /> Class 1 or 1A-150° F. <br /> 4.3 Sampling. <br /> Class 2 —145°F. <br /> Class 3 —130° F. 4.3.1 Sampling material for testing. A <br /> composite sample weighing at least 10 <br /> 3.15 Removability. pounds shall be taken from each lot in ac- <br /> cordance with Method 8001 of Federal Test <br /> 3.15.1 After accelerated weathering. Class Method Standard No. 791. The samples shall <br /> 1, 1A, or 2 compounds shall require not more be placed in clean, dry metal containers and <br /> than 15, 15, or 10 wiping cycles, respectively, forwarded to the test laboratory specified in <br /> for removal from the test panels at the com- the contract. The containers shall be marked <br /> pletion of the accelerated weathering test as follows: <br /> (see 4.6.11). Sample for acceptance tests. <br /> 3.15.2 After autdar storage. Class 1, lA or This specification number.Name of manufacturer. <br /> 2 compounds shall require not more than 150 Manufacturer's Code number. <br /> wiping cycles for removal from the test Batch or lot number. <br /> panels at the completion of the outdoor stor- Contract or order number. <br /> age test (see 4.6.11). Date of sampling. <br /> 3.15.3 After shed storage. Class 3 com- <br /> pound shall require not more than 8 wiping 4.3.2 Qualification test samples. Qualifies- <br /> ..✓ � <br /> tion samples shall consist of approximately <br /> cycles for removal from the test panels at 40 pounds of the compound supplied in a <br /> the completion of the shed storage test (see <br /> top opening 5 gallon container. <br /> 4.6.11). <br /> 4. QUALITY ASSURANCE PROVISIONS 4.3.2.1 The qualification samples shall be <br /> accompanied by the following information <br /> 4.1 The supplier is responsible for the per- and test data: <br /> formance of all inspection requirements as (a) Formulation of the compound, in- <br /> specified herein. Except as otherwise speci- eluding the percentage by weight <br /> fied, the supplier may utilize his own or any of the ingredient materials. The <br /> other inspection facilities and services ac- corresponding chemical names of <br /> ceptable to the Government. Inspection rec- the ingredient materials, in ad- <br /> ords of the examination and tests shall be dition to their trade names, shall <br /> kept complete and available to the Govern- be furnished. <br /> ment as specified in the contract or order. (b) Results of all applicable tests ex- <br /> The Government reserves the right to per- cept for the outdoor and shed <br /> form any of the inspections set forth in the storage tests, and the remov- <br /> specification where such inspections are ability tests following storage. <br /> deemed necessary to assure supplies and <br /> services conform to prescribed requirements. 4.4 Inspection. <br /> 4.2 Lot. A lot shall consist of a manufac- - 4.4.1 Inspection of material. Inspection <br /> turer's batch of the compound. In case the shall be in accordance with Method 9601 of <br /> 4 <br />