ARCHIVED REPORTS_XR0004025 - Laserfiche WebLink

Home Browse Search

Appendix B and tapped to verify that it contains no air bubbles The sample containers for other parameters will be filled, filtered as required, and capped The water sample is collected, labeled, and handled according to the Quality Assurance Plan Water generated during the monitoring event is disposed of accruing to regulatory accepted method pertaining to the site QUALITY ASSURANCE PLAN General Sample Collection and Handling Procedures Proper collection and handling are essential to ensure the quality of a sample Each sample is collected in a suitable container, preserved correctly for the intended analysis, and stored prior to analysis for no longer than the maximum allowable holding time Details on the procedures for collection and handling of samples used on this project can be found in this section Soil and Water Sample Labeling and Preservation Label information includes a unique sample identification number, job identification number, date, and time After labeling all soil and water samples are placed in a Ziplocz type bag and placed in an ice chest cooled to approximately 4° Celsius Upon arriving at Stratus's office the samples are transferred to a locked refrigerator cooled to approximately 4° Celsius Chemical preservation is controlled by the required analysis and is noted on the chain-of-custody form Upon recovery, the sample container is sealed to minimize the potential of volatilization and cross-contamination prior to chemical analysis Soil sampling tubes are typically closed at each end with Teflon sheeting and plastic caps The sample is then placed in a Ziploco type bag and sealed The sample is labeled and refrigerated at approximately 4° Celsius for delivery, under strict chain-of-custody, to the analytical laboratory Sample Identification and Chain-of-Custody Procedures Sample identification and chain-of-custody procedures document sample possession from the time of collection to ultimate disposal Each sample container submitted for analysis has a label affixed to identify the ,lob number, sampler, date and time of sample collection, and a sample number unique to that sample This information, in addition to a description of the sample, field measurements made, sampling methodology, names of on-site personnel, and any other pertinent field observations, is recorded on the borehole log or in the field records The samples are analyzed by a California-certified laboratory A chain-of-custody form is used to record possession of the sample from time of collection to its arrival at the laboratory When the samples are shipped, the person in custody of them relinquishes the samples by signing the chain-of-custody form and noting the time The sample-control officer at the laboratory verifies sample integrity and