Laserfiche WebLink
Fill <br /> 7 .0 WORK ZONE AND DECONTAMINATION PROCEDURES <br /> A site must be controlled to reduce the possibility of <br /> exposure to any contaminants prese t and to limit their <br /> transport from the site by personnel or equipment . <br /> I <br /> 7 .1 Control <br /> A control system is required to ensure that personnel and <br /> equipment working on hazardous waste sites are subject to <br /> appropriate health and safety surveillance and site access <br /> control . <br /> The possibility of exposure or translocation of contaminants <br /> can be reduced or eliminated in a number of ways, including: <br /> • setting security or physical barriers at control points <br /> (' to regulate access to and/or exclude unnecessary <br /> F personnel from the general area <br /> • minimizing the number of personnel and equipment on site <br /> consistent with effective operations <br /> • establishing work zones within the site <br /> • conducting operations in a manner which will reduce the <br /> exposure of personnel and equipment . <br /> • minimizing the airborne dispersion of contaminants <br /> (utilizing dust control Procedures) <br /> • implementing appropriate decontamination procedures for <br /> both equipment and personnel . <br /> 7 .2 Field Operations Work Areas <br /> Work areas (zones) will be established based on anticipated <br /> contamination. Within these zones , prescribed operations will <br /> occur utilizing appropriate Personal Protective Equipment <br /> (PPE) . Movement between areas will be controlled at <br /> checkpoints . The planned zones a e: <br /> • Exclusion (contaminated) <br /> c Contamination Reduction <br /> • Support (noncontaminated) . <br /> f� <br /> 1 . <br /> 13 <br /> F <br />