COMPLIANCE INFO_PRE 2019 - Laserfiche WebLink

Home Browse Search

�= "CEIVEC AUG 2 4 2015 ENVIRONMENTAL amec 1p jJCQ%TU nCOAPTRAMIT foster wheeler Seismic/Anchoring: Seismic/dynamic/hydrostatic load calculations provided with "Hydrostatic and Seismic Analysis" page or as Attachment 3. Seismic/Anchoring findings: The tank as designed and operated, and the containment area in which it is located are adequately anchored and meet minimum seismic safety standards. Initials: S¢4 Leak Test: Brief description of leak test, including type of test used, and results of test: This tank was integrity tested based on recommendations from the manufacturer and the Steel Tank Institute's Standard SP001, "Standard for the Inspection of Aboveground Storage Tanks" (STI SP001). This standard provides recommended integrity testing schedules based on risk to the environment, considering factors such as spill control, release detection methods, and storage capacity. Table 5.5, "Table of Inspection Schedules", of STI SP001 recommends tanks of this size and type undergo periodic visual, documented inspections to assess general AST conditions. These inspections may be conducted by the AST owner and without suspending AST operations or removing the AST from service. Holt of CA conducts these types of inspections on a daily basis. The tank inspector reviewed Holt of CA inspection logs and conducted his own assessment based on the attached checklist. The tank was deemed to be in proper working order and the integrity sound. A detailed description of the integrity testing standard used as well as sample inspection logs are located in Attachment 2. Integrity testing findings: Based on the above noted integrity test and the results obtained from that test, the tank has sufficient integrity for its intended use. Initials: 7-59 Amec Foster Wheeler Environment & Infrastructure, Inc. 1,000 Gal. Waste Oil Tank