Laserfiche WebLink
' DATA QUALIFIERS <br /> ' B - Indicates the compound was found In the blank and the sample <br /> E - Concentrations exceed calibration range of the instrument <br /> ' I - Indicates Interference. <br /> J - Indicates an estimated value for either a TIC or an analyte that meets the identification criteria but <br /> ' the result is less than the specified reporting lima <br /> T - Indicates the compound was found in the TCLP extraction blank and the sample <br /> ' u - Indicates an Inorganic compound was analyzed for but not detected. <br /> U - Indicates an organic compound was analyzed for but not detected <br /> BS - Indicates matrix analyses were conducted on reagent grade water. <br /> ' BSD- Blank Spike Duplicate <br /> BDL- Below Detection Limit <br /> D - Indicates that surrogate/matrix spike recoveries were not obtained because the extract had to be diluted <br /> for analysis <br /> ' DL - Indicates a secondary dilution <br /> DF- Dilution factor <br /> ' LCS- Laboratory Control Sample <br /> MB - Method Blank <br /> ' MS - Matrix Spike <br /> MSD- Matrix Spike Duplicate <br /> ' NA - Not Applicable <br /> ' X - Result is by calculation <br /> NS - Not Spiked *Result was outside advisory limits <br /> ' NC - Not Calculated <br /> ' NR - Not Requued <br /> NOTES <br /> Solid,sediment and sludge results are reported on a dry weight basis except when analyzed for Landfill disposal <br /> parameters (such as mcineration or Illinois Green Sheet parameters) All other mg/kg results are reported on <br /> an "as received" basis Reporting limits are detection limits adjusted for sample size used, dilutions made, and <br /> in the case of dry weight results, the moisture content of the sample <br />