Laserfiche WebLink
i. Laboratory quality control limits f. Injection date and time <br /> I Calculated results g. Injection amount <br /> k. Notes or explanation of any outliers h. Dilution factor(or concentration factor if trap is used) <br /> i. Detector <br /> j. Retention time(RT) <br /> (3)Provide additional information,as specified,for different types of analyses.Tabulate and k. Peak area <br /> present in a clear legible format all information according to the following grouping: I. Concentration in pg/L(Cone)(sample results reported in ppbv or ppmv must <br /> be converted in pg/L) <br /> (A). Initial calibration <br /> M. Total number of peaks found by each detector <br /> nom, n. Unidentified peaks and/or other analytical remarks " - <br /> a. Standard source(STD Lot ID No.) �: o. Surrogate results <br /> b. Detector <br /> P. Control limits <br /> C. Retention time(RT) <br /> d. Standard mass or concentration(Mass/Cone) <br /> $ ` <br /> e. Peak area(Area) <br /> f. Response factor(RF) 4 ,. <br /> g. Average response factor(RF„w) !. <br /> h. Standard deviation(SD1)of RF,i.e.io <br /> n <br /> IE(RF...-RFYI(n-1)1" <br /> n s number of points In Initial calibration <br /> i. Percent relative standard deviation(%RSD),i.e.,(SD,.,/RFave)x 100(%) <br /> j. Acceptable range of%RSD(ACC RGE) <br /> (B). Daily calibration check sample <br /> a. Source of standard <br /> b. Detector A <br /> C. Retention time(RT) <br /> d. Standard mass or concentration <br /> e. Peak area i <br /> f. Response factor(RF) <br /> g. Percent difference between RF and RFave from initial calibration(%DIFF) <br /> h. Acceptable range of%DIFF(ACC RGE) <br /> (C). Laboratory Control Sample(LCS). Same format as daily calibration check sample <br /> w <br /> (D). Soil gas sample <br /> a. Sample identification <br /> b. Sampling depth <br /> C. Purge volume <br /> d. Vacuum pressure <br /> e. Sampling date and time <br /> 12/10/2009 -95- 12/10/2009 -96- <br />