Laserfiche WebLink
' TABLE 1 - Minimum Required Clearances for Overhead Lines <br /> ' POWER LINES NOMINAL SYSTEM MINIMUM REQUIRED CLEARANCE <br /> (kilovolts) <br /> 50 or under 10 feet (3.05 meters) <br /> 69 12 feet(3.66 meters) <br /> 115-161 15 feet (4.57 meters) <br /> 230-285 20 feet (6.10 meters) <br /> 345 25 feet (7.62 meters) <br /> 500 35 feet (10.67 meters) <br /> 5.0 ONSITE SAFETY EQUIPMENT <br /> The following subsections describe personal and general safety equipment that will be <br /> required onsite. <br /> 5.1. PERSONAL SAFETY EQUIPMENT <br /> The following personal protective equipment (PPE) is required to be wom while onsite: <br /> • Hard hat <br /> • Steel toed shoes <br /> • Gloves <br /> • Safety glasses or goggles <br /> • Hearing protection <br /> iAdditional PPE may be required based on air monitoring. <br /> 5.2. AIR MONITORING WITH PID OR FID <br /> A photo-ionization detector(PID) or flame ionization detector(FID) will be used onsite <br /> to monitor for total ionizable compounds in the air,particularly in the areas of sampling. <br /> Because the PID/FID measures the total ionizable compounds (TICS), action levels have <br /> been established specifically for PID/FID readings at the site. These are presented in <br /> Table 2. <br /> ' PUS:ESPRORM\2006�%ShcO Tn Pump StmiooSMF R.doc 4 <br />